00198611-01_IM_712.0_R18-2_EN.pdf - 第57页
Station Software Ver sion 712.0 (R18 - 2) / Installation Manual 11/2018 Edition 57 NOTICE To establish the co nnection between th e SIPLACE Coplan computer software or feeder computer software and t he SIPLACE stat ion s…
Station Software Version 712.0 (R18-2) / Installation Manual 11/2018 Edition
56
The Ready to install dialog box is displayed again.
► Click the Install button to start the installation.
The necessary files for the respective software will be installed on the Vision computer.
The setup status is displayed during installation.
Figure 6-7: Setup status
After successful installation, the following dialog box is displayed.
Figure 6-8: Installation completed
Station Software Version 712.0 (R18-2) / Installation Manual 11/2018 Edition
57
NOTICE
To establish the connection between the SIPLACE Coplan computer software or feeder
computer software and the SIPLACE station software after the installation has been
completed, the Vision computer and the station computer must first be shut down and
the machine then switched off completely.
► To do this, open the Start menu on the station computer and select All Programs – ASM
Station-SW-7xx – Shutdown all computer.
► Switch the machine off when the computer systems have shut down.
► Then, switch the machine on again. This reboots the Vision computer and the station computer.
Station Software Version 712.0 (R18-2) / Installation Manual 11/2018 Edition
58
6.2 Installing the Software on the Vision Computer via a Remote
Connection
Vision computers are generally less accessible than station computers and do not have their own
input devices or displays. For this reason, a procedure describes how to perform the Vision
computer installation using the station computer.
In the first step, the installation files of the respective software are copied to the Vision computer.
I.e. the contents of the installation media or installation ISO image must be locally available on the
Vision computer for a robust and successful installation.
In the second step, a remote desktop connection is established from the station computer to the
Vision computer. The actual installation is then performed remotely via this connection.
In the following, the necessary requirements and steps are described.
6.2.1 Requirements
– The Microsoft Windows Embedded Standard 7 or Microsoft Windows 10 IoT operating
system must be installed on the Vision computer, see separate Installation Manual, item no.
[00198622-xx].
– The "SIPLACE Windows Embedded Standard 7 Configurator" version 2.3.1 or higher or
"SIPLACE Windows 10 Configurator" must have been run directly on the Vision computer. On
this computer, the Configurator creates the D:\VisionShare directory that is shared for the
ASM_Admin user. Thereafter, this directory on the Vision computer can be accessed from the
station computer.
– The station computer and Vision computer must be interconnected in the SIPLACE LAN by a
LAN cable or a switch via the following connections:
Connection to machine LAN (at the station computer)
Connection to SR (at the Vision computer)
Please also refer to section 4.3.
6.2.2 Establishing a Connection to the Vision Computer
► Log in to the station computer under the ASM_Admin user account.
Figure 6-9: Establishing connection
► Enter the current Vision computer or the respective IP address in the input box of the Windows
Start menu:
\\VR_3 or IP address 192.168.255.253 (for Coplan computer)
\\VR_4 or IP address 192.168.255.251 (for feeder computer)