TR7600 SIII_Operation_en_v_2_0_2.pdf - 第17页
Test Research, Inc . TR7600 SIII Series User Gu ide – Operat ion 9 3) Press the “Start Tes t” button on the VPLC panel s o the conve y or will load the board in to the m achine with subsequent scanning process. Figure 14…
Test Research, Inc.
8 TR7600 SIII Series User Guide – Operation
2.4 Start to Inspect
1) Click on “Inspection Mode” button to proceed.
Figure 12: Inspection Mode
2) Press “Start” button to initiate the inspection.
Figure 13: “Start” Button
Test Research, Inc.
TR7600 SIII Series User Guide – Operation 9
3) Press the “Start Test” button on the VPLC panel so the conveyor will load the board into
the machine with subsequent scanning process.
Figure 14: “Start Test” Button
4) When the scan is complete, the inspection result will be sent to the repair station
automatically in “Auto Mode”. Otherwise, user will need to press the “Fail” button
manually in order to proceed.
Figure 15: “Fail” Button
5) You could enable Auto or Manual mode confirmation by through Inspect -> Parameters.
Under “Mode” tab, you could select Auto, Confirm or Offline Fine Tuning.
Figure 16: Auto, Confirm or Offline Fine Tuning Modes
Test Research, Inc.
10 TR7600 SIII Series User Guide – Operation
2.5 Inspect the Same Module on other Same Type Machine
1) Copy the following files to other systems.
The folder that the project file (*.rcp) locates.
[C:\AOI\Packagelibrary] folder
[C:\AOI\Imagelibrary] folder.
[C:\TR7600\Model Name] folder.
2) Open the software and load the project.
3) Click [Test] on HCI (Human Computer Interface) to let board in.
4) Click [Inspect] to inspect.
2.6 End Inspection
1) Click [Esc] on the keyboard to stop the current project.
2) Press or select [File/Exit] to close the main program. The system will ask if you want
to save the project.
3) Click [Start/Shut Down] to shut off the computer.
4) Turn the power switch counterclockwise to turn off the power.
5) Close the breaker of the machine.