SECS GEM Manual.pdf - 第149页

GEM Manual for DEK Printers Event M essages Issue 1.6 January 22, 2018 Page 149 of 171 40195 Machine prime paste dispense cancelled. 40196 Machine prime paste dispense finished. 40350 Print cycle paused. 40351 Print cycl…

100%1 / 171
GEM Manual for DEK Printers Event Messages
Issue 1.6 January 22, 2018 Page 148 of 171
40078 Password attempt succeeded.
40079 Password attempt failed.
40126 Fiducial setup entered.
40127 Fiducial setup ended.
40128 Diagnostics ended.
40129 Adjust entered.
40130 Adjust ended.
40131 Adjust while running entered.
40132 Adjust while running ended.
40151 Verification succeeded (see DVID 2034).
40153 Verification value reset (see DVID 2034).
40154 Verification value restored (see DVID 2034).
40155 Batch/lot ID changed.
40156 Product ID verification succeeded.
40158 Auto paste dispense cancelled.
40160 Proflow hardware detected.
40161 Proflow raised.
40162 Proflow lowered.
40163 Proflow primed.
40164 Proflow kneaded.
40165 Proflow paste cartridge low.
40166 Proflow paste cartridge set to empty.
40167 Proflow paste cartridge set to full.
40168 Proflow paste cartridge changed.
40169 Proflow paste conditioning started.
40170 Proflow paste conditioning stopped.
40171 Proflow paste conditioning finished.
40172 Proflow paste recharging started.
40173 Proflow paste recharging stopped.
40174 Proflow paste recharging finished.
40177 Traceability Data Available.
40179 Deceleration offset window changed.
40180 Proflow grid stall detected.
40181 Proflow board count recharge due.
40182 Proflow paste head low.
40183 Proflow paste head ok.
40184 Proflow paste recharging failed.
40185 Proflow carriage home offset changed.
40186 Product defined tooling confirmation.
40191 Fiducial Alignment Started.
40192 Fiducial Alignment Complete.
40194 Machine prime paste dispense started.
GEM Manual for DEK Printers Event Messages
Issue 1.6 January 22, 2018 Page 149 of 171
40195 Machine prime paste dispense cancelled.
40196 Machine prime paste dispense finished.
40350 Print cycle paused.
40351 Print cycle resumed.
40352 Ball escape removed.
40353 Proflow cassette low cleared.
40354 SPC limit error cleared.
40355 Machine paste knead started.
40356 Machine paste knead finished.
40357 Tooling setup started.
40358 Tooling setup finished.
40359 Stencil alignment started.
40360 Stencil alignment finished.
40361 Print pre checks complete.
40362 Deposit verification passed.
40363 Deposit verification started.
40364 Paste cartridge empty deferred.
40369 Stinger purge.
40370 Stinger auto z calibration.
40371 Stinger replenishment.
40372 Stinger replenishment deferred.
40374 Fiducial Alignment SW Fallback.
40387 Vacuum tooling off.
40388 Vacuum tooling on.
40397 Double alignment performed.
40422 Windows 7 operating system error.
40423 XP operating system.
40434 Paste dispense completed.
40435 Stinger dispense started.
40436 Stinger dispense completed.
40454 Camera not clear of table.
40455 Reset pressure correction offset.
GEM Manual for DEK Printers Event Messages
Issue 1.6 January 22, 2018 Page 150 of 171
8.10 Specific Material Movement Events
EVENT - CEID
DESCRIPTION
31258 Paste dispensing.
31259 Paste cartridge empty.
31268 Screen unloaded.
31269 Screen loaded.
31270 Tool change started.
31271 Tool change completed.
31274 Board received.
31276 Printed board ready.
31319 Board delivered / removed.
40024 Vortex cassette replaced.
40071 Paper roll replaced.
8.11 Host Specific Information Events
EVENT - CEID
DESCRIPTION
31400 Process program directory request.
31401 Process program request.
31402 Erase process program request.
31403 Rename process program request.
31404 Load process program request.
31405 Download process program request.
31406 Upload process program request.
31407 Download configuration request.
31408 Upload configuration request.
31409 Upload management data request.
31410 Clear management batch data request.
31411 Clear management session data request.
31412 Upload event log.
31413 Clear event log request.
31414 Comms - Start request.
31415 Comms - Stop request.
31416 Update mode request.
31417 Communication error.
31418 Parameter information uploaded.
31419 Parameter information downloaded.
31420 Upload parameter.
31421 Comms - Status request.