SECS GEM Manual.pdf - 第80页

GEM Manual for DEK Printers SECS II Implementation Issue 1.6 January 22, 2018 Page 80 of 171 S2F37 Enable / Disable Event Report ( EDER) S2F38 Enable / Disable Event Report Acknowledge (EERA) Description: The host uses E…

100%1 / 171
GEM Manual for DEK Printers SECS II Implementation
Issue 1.6 January 22, 2018 Page 79 of 171
S2F35 Link Event Report (LER)
S2F36 Link Event Report Acknowledge (LERA)
Description: This transaction enables the host to link reports to a specific event CEID,
such that when the event occurs, the equipment will include the reports in the S6F11
message. Note that the event must be enabled using message S2F37, for the report(s) to
be sent.
A. Host Initiated
Host to equipment: S2F35
Structure: L,2
1. <DATAID>
2. L,a (number of events)
1. L,2 (event 1)
1. <CEID
1
>
2. L,b (number of reports attached)
1. <RPTID
1
>
.
.
b. <RPTIDb>
a. L,2 (event a)
1. <CEID
a
>
2. L,c (number of reports attached)
1. <RPTID
1
>
.
.
c. <RPTIDc>
Exception: A list of zero length following CEID deletes all report links to that
event.
Equipment to host: S2F36
Structure: <LRACK>
B. Equipment Initiated - Not applicable.
GEM Manual for DEK Printers SECS II Implementation
Issue 1.6 January 22, 2018 Page 80 of 171
S2F37 Enable / Disable Event Report (EDER)
S2F38 Enable / Disable Event Report Acknowledge (EERA)
Description: The host uses EDER to enable or disable reporting for a specified group of
events (CEID’s). If any errors are detected in EDER, then no changes will be made i.e.
no partial changes.
A. Host Initiated
Host to equipment: S2F37
Structure: L,2
1. <CEED> enable/disable
2. L,n
1. <CEID1> collection event 1
.
.
n. <CEIDn> collection event n
Exception: If n = 0 then all events are enabled/disabled.
Equipment to host: S2F38
Structure: <ERACK >
B. Equipment Initiated - Not applicable.
GEM Manual for DEK Printers SECS II Implementation
Issue 1.6 January 22, 2018 Page 81 of 171
S2F39 Multi-block Inquire (DMBI)
S2F40 Multi-block Grant (DMBG)
Description: If any host initiated primary message is multi-block, it must be preceded
by this transaction, the equipment must reply with GRANT = 0 for the multi-block
message to proceed.
A. Host Initiated
Host to equipment: S2F39
Structure: L,2
1. <DATAID>
2. <DATALENGTH>
Equipment to host: S2F40
Structure: <GRANT >
B. Equipment Initiated - Not applicable.