SECS GEM Manual.pdf - 第39页

GEM Manual for DEK Printers Capabilities Issue 1.6 January 22, 2018 Page 39 of 171 # Current State Trigger New State Action Co mment 12 EQUIPMENT SETUP 1. Operato r selects diagnostics by usin g mode change. 2. A system …

100%1 / 171
GEM Manual for DEK Printers Capabilities
Issue 1.6 January 22, 2018 Page 38 of 171
Transition Table:
# Current State Trigger New State Action Comment
1 EQUIPMENT
RECOVERY
All software and hardware
initialisation has been
completed.
EQUIPMENT
READY
None Machine has been restored to
its ready condition following
from an error situation.
2 EQUIPMENT
READY
1. Operator action to select
run mode.
2. Host action to select run
mode.
EQUIPMENT
RUNNING
None Equipment is now printing
3 EQUIPMENT
RUNNING
1. Paste dispense cycle.
2. Clean screen cycle.
EQUIPMENT
SETUP
None This covers automatic or
manual paste dispenses and
automatic screen clean cycles
4 EQUIPMENT
SETUP
Completion of:
1. Paste dispense cycle.
2. Clean screen cycle.
EQUIPMENT
RUNNING
None State subsequent to the state
above when the function is
complete.
5 EQUIPMENT
RUNNING
1. Process material being
loaded from the upline
machine.
2. Process material being
unloaded to the downline
machine.
EQUIPMENT
WAITING
None Printer is in this state when
waiting to unload or load
boards to/from the external
machine.
6 EQUIPMENT
WAITING
1. Process material
successfully loaded from the
upline machine
2. Process material
successfully unloaded to the
downline machine and next
process material successfully
loaded from the upline
machine.
EQUIPMENT
RUNNING
None Board delivered or received
to/from external machine.
7 EQUIPMENT
RUNNING
1. Operator action to select
end run.
2. Batch limit complete.
3. Host action to select end
run.
EQUIPMENT
READY
None Batch complete.
8 EQUIPMENT
READY
1. Head opening/open.
2. Paste dispense cycle.
3. Clean screen cycle.
4. Screen change.
5. Tooling change.
6. Pressure readings being
taken.
7. Operator action to select
Setup mode.
EQUIPMENT
SETUP
None Any machine setup selected.
9 EQUIPMENT
READY
Operator selects
maintenance key.
EQUIPMENT
MAINTENANCE
None None
10 EQUIPMENT
SETUP
Completion of :
1. Head closing/closed.
2. Clean screen cycle.
3. Paste dispense cycle.
4. Operator action to exit
Setup mode.
EQUIPMENT
READY
None Follow on from state 8 when
function is complete.
11 EQUIPMENT
MAINTENANCE
Operator selects exit from
maintenance mode.
EQUIPMENT
READY
NONE Follow on from state 9 when
maintenance complete.
GEM Manual for DEK Printers Capabilities
Issue 1.6 January 22, 2018 Page 39 of 171
# Current State Trigger New State Action Comment
12 EQUIPMENT
SETUP
1. Operator selects
diagnostics by using mode
change.
2. A system error occurring.
3. Restart from a system
error.
4. Initial diagnostics, when
powering-up the machine.
EQUIPMENT
DOWN
Error
notification
or
diagnostics
entered.
None
13 EQUIPMENT
WAITING
14 EQUIPMENT
RUNNING
15 EQUIPMENT
READY
16 EQUIPMENT
MAINTENANCE
17 EQUIPMENT
DOWN
1. Operator selects recover
action.
2. Restart from a system
error complete.
EQUIPMENT
RECOVER
None Any recovery from the
Equipment Down state
18 EQUIPMENT
MAINTENANCE
1. User selects ‘Machine
Setup’ button
EQUIPMENT
SETUP
None Move from Maintenance to
Setup screen
19 EQUIPMENT
SETUP
1. Having come from
Maintenance page (transition
18) user selects the ‘Back’
button
EQUIPMENT
MAINTENANCE
None Move back from Setup to
Maintenance screen
GEM Manual for DEK Printers Capabilities
Issue 1.6 January 22, 2018 Page 40 of 171
4.5 Equipment Constants
This capability enables the host to read and set the value of the equipment constants defined in
chapter 7. For this purpose, the following functionality is provided.
Host can send a list of equipment constant identities ECID's and values ECV's.
Host can request current ECV's.
Host can request a list of EC names.
Scenarios:
Host sends equipment constants:
Comments Host Equipment Comments
List of constants and values S2F15 -->
<-- S2F16 Acknowledge
Host equipment constant request:
Comments Host Equipment Comments
Request constants S2F13 -->
<-- S2F14 List of ECID's and ECV's
Host equipment constant namelist request:
Comments Host Equipment Comments
Request constant namelist S2F29 -->
<-- S2F30 EC Name list
Operator changes equipment constant:
Comments Host Equipment Comments
<-- S6F11 Equipment sends EC change event
Host Acknowledges change S6F12 -->