YSi-V_Ope_E.pdf - 第36页
The instruction manual of this machine is written for those who operate this machine. Please read this manual carefully for correct operations and pay special attention to safety precautions. After reading through this m…
9. How to replace consumable parts 4-27
9.1 Cleaning and replacing the conveyor belts 4-27
9.2 Replacing the UPS (uninterruptible power supply) battery 4-29
Chapter 5 Lubrication points
1. Applicable grease and grease gun 5-1
1.1 Applicable grease 5-1
1.2 Grease gun 5-1
2. Lubrication of each unit 5-2
2.1 Each axis unit 5-2
2.1.1 X and CZ axis guide and ball screw 5-2
2.1.2 Y axis guide and ball screw 5-3
2.1.3 W axis guide and ball screw 5-4
Appendix
1. Power connection terminals A-1
2. Connection between machines A-2
3. UPS (Uninterruptible Power Supply) A-3
3.1 Safety precaution A-3
3.1.1 Precautions when shipping or exporting the UPS A-3
3.1.2 Disposing of used battery after replacement A-3
3.1.3 Safety precautions A-3
3.2 About the UPS A-5
3.3 Operation and setting A-6
3.3.1 Front panel A-6
3.3.2 Operation during normal operation (power is normal) A-6
3.3.3 Operation during power failure or trouble A-6
3.4 Maintenance A-7
3.4.1 Battery replacement period A-7
3.4.2 Battery replacement A-7
3.4.3 Replacement battery storage A-7
3.5 Troubleshooting A-8
Index
The instruction manual of this machine is written for those who operate
this machine.
Please read this manual carefully for correct operations and pay
special attention to safety precautions.
After reading through this manual, please use this manual as an
occasional reference and keep it within reach.
Before using the YSi-V
Contents
1. Using this manual i
1.1 Available manuals i
1.2 Manual contents i
2. Contents of each chapter ii
3. Page layout iii
i
Before using the YSi-V
1. Using this manual
1.1 Available manuals
There are several different manuals available including this manual to help users use the YSi-V effectively
depending on their skills, expertise, and applications. Available manuals are shown below.
n
Available manuals
The following manuals are supplied with the YSi-V you purchased.
This manual
Operator's Manual
Programming Manual
Manuals supplied with YSi-V
23000-M9-00
1.2 Manual contents
The contents of each manual are briefly explained below.
n
Contents of manuals supplied with YSi-V
Operator's Manual Programming Manual
This manual is intended for YSi-V operators. It provides
an overview of the YSi-V and information necessary to
operate the YSi-V.
This manual is intended for those who program inspection
data. It describes how to create and edit data needed for
YSi-V operation and board inspection.
Before using the YSi-V
Chapter 1: Part names and functions
Chapter 2: Basic operation
Chapter 3: Daily operation
Chapter 4: Maintenance
Chapter 5: Lubrication points
Appendix Specifications, UPS
Before using the machine
Chapter 1: Basic operation
Chapter 2: Creating an inspection program
Chapter 3: Creating a component library
Chapter 4: Setting the inspection item
Chapter 5: Setting the inspection machine
Appendix
Option Manual Software option manual (CD)
Explains the handling of the optional units to the YSi-V.
The manual for each software option for inspection
equipment is stored on the installation CD.
n
Laser height sensor
n
Marking unit
n
Repair station
n
Remote judgment station
c
CAUTION
The contents of these manuals are subject to change without prior notice.