YSi-V_Ope_E.pdf - 第37页
i Before using the YSi-V 1. Using this manual 1.1 A vailable manuals T here are several different manuals a vailable including this manual to help users use the YSi-V effectively depending on their skills, expertise, and…
The instruction manual of this machine is written for those who operate
this machine.
Please read this manual carefully for correct operations and pay
special attention to safety precautions.
After reading through this manual, please use this manual as an
occasional reference and keep it within reach.
Before using the YSi-V
Contents
1. Using this manual i
1.1 Available manuals i
1.2 Manual contents i
2. Contents of each chapter ii
3. Page layout iii
i
Before using the YSi-V
1. Using this manual
1.1 Available manuals
There are several different manuals available including this manual to help users use the YSi-V effectively
depending on their skills, expertise, and applications. Available manuals are shown below.
n
Available manuals
The following manuals are supplied with the YSi-V you purchased.
This manual
Operator's Manual
Programming Manual
Manuals supplied with YSi-V
23000-M9-00
1.2 Manual contents
The contents of each manual are briefly explained below.
n
Contents of manuals supplied with YSi-V
Operator's Manual Programming Manual
This manual is intended for YSi-V operators. It provides
an overview of the YSi-V and information necessary to
operate the YSi-V.
This manual is intended for those who program inspection
data. It describes how to create and edit data needed for
YSi-V operation and board inspection.
Before using the YSi-V
Chapter 1: Part names and functions
Chapter 2: Basic operation
Chapter 3: Daily operation
Chapter 4: Maintenance
Chapter 5: Lubrication points
Appendix Specifications, UPS
Before using the machine
Chapter 1: Basic operation
Chapter 2: Creating an inspection program
Chapter 3: Creating a component library
Chapter 4: Setting the inspection item
Chapter 5: Setting the inspection machine
Appendix
Option Manual Software option manual (CD)
Explains the handling of the optional units to the YSi-V.
The manual for each software option for inspection
equipment is stored on the installation CD.
n
Laser height sensor
n
Marking unit
n
Repair station
n
Remote judgment station
c
CAUTION
The contents of these manuals are subject to change without prior notice.
ii
Before using the YSi-V
2. Contents of each chapter
This manual is comprised of the following chapters.
Chapter 1
Part names and functions
Explains major part names and functions of the YSi-V that you should know before attempting operation.
Chapter 2
Basic operation
This chapter explains how to start up the YSi-V and turn it off, as well as the basic menus and elements displayed on the
operation screen.
Chapter 3 Daily operation
Chapter 3 describes the daily work performed by the operator for board inspection.
Chapter 4 Maintenance
This chapter describes checkpoints and procedures for daily and periodic inspections that must be perform to avoid
trouble with the YSi-V.
Chapter 5 Lubrication points
This chapter describes the instructions about lubrication points and how to lubricate the ball screws or guides of each
axis.
Appendix
The appendix provides specifications for power supply connections and machine-to-machine connections, as well as
information about UPS.
Index
The index at the end of this manual helps you quickly find where necessary items are explained.