00198788-01_UM_SSI_DE_EN.pdf - 第34页
34 User Manual / Bedienungsanleitung SIPLACE Single Slot Interface 05/2021 List of contents 6 Overviews .. 57 6.1 Block diagram of power pack and EDIF .. 57 6.2 CAN bus cable, docking station, terminating resistor .…
33User Manual / Bedienungsanleitung SIPLACE Single Slot Interface 05/2021
List of contents
List of contents
1 Introduction.. 35
1.1 Module Description.. 35
1.1.1 Typeplate and Serial Number.. 35
1.1.2 Technical Data.. 35
1.1.3 EU Declaration of Conformity.. 36
1.1.4 Correct Usage.. 36
1.1.5 Incorrect Usage.. 36
1.1.6 Environmentally-friendly disposal of materials and components.. 37
1.1.7 Electromagnetic compatibility (EMC).. 37
1.1.8 Use of original accessories and spare parts.. 37
1.2 Important Notes about this Manual.. 37
1.2.1 Contents and Filing of this Manual.. 37
1.2.2 Danger notes.. 37
1.2.3 Manufacturer's/supplier's liability.. 37
1.2.4 Release History.. 38
1.2.5 Further Information.. 38
1.2.5.1 How To Get Information.. 38
1.2.5.2 SIPLACE on the World Wide Web (WWW).. 38
2 Operational safety.. 39
2.1 Safety Instructions.. 39
2.1.1 Conventions for the use of safety instructions and symbols.. 39
2.1.2 Staff Qualifications and Training.. 39
2.1.3 Important notes on operational safety.. 40
2.1.3.1 General.. 40
2.1.3.2 Safety of Operators and Other Persons.. 40
2.1.3.3 Safety of Plant and Equipment.. 40
3 Function description and structure.. 41
3.1 Function description.. 41
3.2 Structure.. 42
3.3 Repairing the X Feeder Modules.. 43
4 Operation.. 45
4.1 Setting up the SSI.. 45
4.2 Connecting a Feeder Module.. 46
4.3 Removing the feeder module.. 48
4.4 Table adapter.. 49
4.5 Preparation table.. 50
4.6 Tasks for Setup Center.. 51
5 CAN ID mode and presettings.. 53
5.1 CAN ID mode.. 53
5.2 Setting the CAN ID.. 53
5.3 Setting the baud rate.. 55
1 Introduction
1.1 Module Description
User Manual / Bedienungsanleitung SIPLACE Single Slot Interface 05/2021 35
1 Introduction
1.1 Module Description
The Single Slot Interface (referred to as SSI in this document) enables you to operate X feeder
modules outside a placement machine or a pre-setup area and to troubleshoot in the vicinity of the
line. The SSI is designed for use as a 1 track pre-setup area with a connection to the ASM Setup
Center.
1.1.1 Typeplate and Serial Number
The typeplate with the serial number is located on the ground plate of the SSI frame (under the
EDIF).
1.1.2 Technical Data
SIPLACE X feeder SSI (Single Slot Interface)
Width x length x height 130mmx589mmx257.6mm
Weight 8.35kg
Frequency 47 – 63 Hz
Number of phases 1/N/PE
Nominal voltage ~90 – 264 VAC
Full load current 1.6 – 0.8 A
Circuit breaker 16 A
Short-circuit resistance 1.6 kA
Ambient conditions for packaging, transportation and storage
Temperature range -25°C to 55°C
Atmospheric humidity Up to 95 %
Ambient pressure Up to 1700m height without pressure equalization