00198788-01_UM_SSI_DE_EN.pdf - 第36页
1 Introduction 1.1 Module Description 36 User Manual / Bedienungsanleitung SIPLACE Single Slot Interface 05/2021 Ambient conditions for module operation Temperature range 15°C to 35°C Atmospheric humidity 30% to 75% Ambi…
1 Introduction
1.1 Module Description
User Manual / Bedienungsanleitung SIPLACE Single Slot Interface 05/2021 35
1 Introduction
1.1 Module Description
The Single Slot Interface (referred to as SSI in this document) enables you to operate X feeder
modules outside a placement machine or a pre-setup area and to troubleshoot in the vicinity of the
line. The SSI is designed for use as a 1 track pre-setup area with a connection to the ASM Setup
Center.
1.1.1 Typeplate and Serial Number
The typeplate with the serial number is located on the ground plate of the SSI frame (under the
EDIF).
1.1.2 Technical Data
SIPLACE X feeder SSI (Single Slot Interface)
Width x length x height 130mmx589mmx257.6mm
Weight 8.35kg
Frequency 47 – 63 Hz
Number of phases 1/N/PE
Nominal voltage ~90 – 264 VAC
Full load current 1.6 – 0.8 A
Circuit breaker 16 A
Short-circuit resistance 1.6 kA
Ambient conditions for packaging, transportation and storage
Temperature range -25°C to 55°C
Atmospheric humidity Up to 95 %
Ambient pressure Up to 1700m height without pressure equalization
1 Introduction
1.1 Module Description
36 User Manual / Bedienungsanleitung SIPLACE Single Slot Interface 05/2021
Ambient conditions for module operation
Temperature range 15°C to 35°C
Atmospheric humidity 30% to 75%
Ambient pressure > 750mbar
1.1.3 EU Declaration of Conformity
The product described below conforms to the regulations and standards listed in the EU Decla-
ration of Conformity provided.
Type Single Slot Interface
Item no.: 00120676-xx
Manufacturer:
ASM Assembly Systems GmbH & Co.KG
Rupert-Mayer-Str. 44
81379 Munich
Germany
1.1.4 Correct Usage
The product may only be used for its intended purposes as described in the catalogs and technical
descriptions, meaning for operation and troubleshooting of X feeder modules outside the place-
ment machine or a pre-setup area and only with the third-party equipment and components recom-
mended or permitted by ASM Assembly Systems GmbH & Co. KG.
Any other use is deemed to be incorrect and not as prescribed.
In the case of incorrect usage, ASMAssembly SystemsGmbH&Co.KG will not assume liability
for any damage which occurs and will not guarantee the correct and proper function of machine
components.
Prescribed or correct usage includes the observance of all the instructions in this user guide.
The proper and safe operation of the product requires correct transportation, storage, installation
and assembly, plus careful, accurate utilization and servicing.
1.1.5 Incorrect Usage
Failure to use the product as prescribed can result in both danger to life and limb and material
damage. For this reason, non-prescribed usage is prohibited. If the product is not used as pre-
scribed, ASM Assembly Systems GmbH & Co. KG will not accept liability for any damage that may
occur and will not guarantee that the components will work properly and without problems.
Non-prescribed use of the module includes the following examples:
●
The use of feeder modules that do not meet the permitted specification.
●
Use of unauthorized accessories and additional modules.
●
Use of the module by unqualified personnel.
1 Introduction
1.2 Important Notes about this Manual
User Manual / Bedienungsanleitung SIPLACE Single Slot Interface 05/2021 37
1.1.6 Environmentally-friendly disposal of materials and components
Our products are manufactured using only materials and parts that can be easily separated and
disposed of in an environmentally-friendly way.
NOTICE
Observe the applicable regulations
The company operating the system has sole responsibility for the proper, environmentally-
friendly disposal of machines, working materials, consumable materials and wear parts.
► Please observe your national statutory provisions for waste disposal and environ-
mental protection.
1.1.7 Electromagnetic compatibility (EMC)
All SIPLACE products are designed and tested for professional use in industrial applications. Elec-
tromagnetic compatibility in terms of the emission of interference cannot be guaranteed in any
other environment.
1.1.8 Use of original accessories and spare parts
Only use original spare parts and authorized accessories. The use of other parts will affect safety
and will invalidate the liability for any consequential damage.
1.2 Important Notes about this Manual
1.2.1 Contents and Filing of this Manual
This User Manual contains basic information that must be observed when setting up, operating and
maintaining the module. The service engineers, qualified staff, operators and users must therefore
read it before commencing installation and commissioning. The instructions must be kept perman-
ently accessible wherever the module is used.
In addition, the user must ensure that the employees have fully understood the contents of the user
manual.
1.2.2 Danger notes
WARNING
Danger notes
► Work may only be performed on the SIPLACE Single Slot Interface if the personnel
concerned have a thorough knowledge of the relevant section of the user guide.
► All work must be carried out by appropriately trained and qualified personnel.
► All warnings, cautions and hazard notes must be observed.
► Carefully read through the chapter on operational safety for this purpose.
1.2.3 Manufacturer's/supplier's liability
We draw your attention to the fact that these instructions only contain descriptive and explanatory
material and do not include any contractual conditions or undertakings. All obligations of ASM
Assembly Systems GmbH & Co. KG are conclusively specified in the respective contract, on the
basis of which you have received the machine described therein. This applies in particular to all
statements regarding performance or service life and the agreed liability for faults or defects. The
provisions of the contract regarding the liability for faults or defect are neither extended nor restric-
ted by any statements in this manual.