00198788-01_UM_SSI_DE_EN.pdf - 第38页
1 Introduction 1.2 Important Notes about this Manual 38 User Manual / Bedienungsanleitung SIPLACE Single Slot Interface 05/2021 1.2.4 Release History Document SIPLACE Single Slot Interface Instruction manual Release Amen…
1 Introduction
1.2 Important Notes about this Manual
User Manual / Bedienungsanleitung SIPLACE Single Slot Interface 05/2021 37
1.1.6 Environmentally-friendly disposal of materials and components
Our products are manufactured using only materials and parts that can be easily separated and
disposed of in an environmentally-friendly way.
NOTICE
Observe the applicable regulations
The company operating the system has sole responsibility for the proper, environmentally-
friendly disposal of machines, working materials, consumable materials and wear parts.
► Please observe your national statutory provisions for waste disposal and environ-
mental protection.
1.1.7 Electromagnetic compatibility (EMC)
All SIPLACE products are designed and tested for professional use in industrial applications. Elec-
tromagnetic compatibility in terms of the emission of interference cannot be guaranteed in any
other environment.
1.1.8 Use of original accessories and spare parts
Only use original spare parts and authorized accessories. The use of other parts will affect safety
and will invalidate the liability for any consequential damage.
1.2 Important Notes about this Manual
1.2.1 Contents and Filing of this Manual
This User Manual contains basic information that must be observed when setting up, operating and
maintaining the module. The service engineers, qualified staff, operators and users must therefore
read it before commencing installation and commissioning. The instructions must be kept perman-
ently accessible wherever the module is used.
In addition, the user must ensure that the employees have fully understood the contents of the user
manual.
1.2.2 Danger notes
WARNING
Danger notes
► Work may only be performed on the SIPLACE Single Slot Interface if the personnel
concerned have a thorough knowledge of the relevant section of the user guide.
► All work must be carried out by appropriately trained and qualified personnel.
► All warnings, cautions and hazard notes must be observed.
► Carefully read through the chapter on operational safety for this purpose.
1.2.3 Manufacturer's/supplier's liability
We draw your attention to the fact that these instructions only contain descriptive and explanatory
material and do not include any contractual conditions or undertakings. All obligations of ASM
Assembly Systems GmbH & Co. KG are conclusively specified in the respective contract, on the
basis of which you have received the machine described therein. This applies in particular to all
statements regarding performance or service life and the agreed liability for faults or defects. The
provisions of the contract regarding the liability for faults or defect are neither extended nor restric-
ted by any statements in this manual.
1 Introduction
1.2 Important Notes about this Manual
38 User Manual / Bedienungsanleitung SIPLACE Single Slot Interface 05/2021
1.2.4 Release History
Document
SIPLACE Single Slot Interface
Instruction manual
Release Amendments
05/2021 First edition
1.2.5 Further Information
1.2.5.1 How To Get Information
If you have any questions about this manual or if you would like more information about certain
subjects, please contact your local SIPLACE branch or us directly:
ASM Assembly Systems GmbH & Co. KG
Rupert-Mayer-Str. 44
81379 München
1.2.5.2 SIPLACE on the World Wide Web (WWW)
Log in to our SIPLACE® homepage at http://www.asm-smt.com.
You can choose between the German and English version.
The different sections contain information about our products, services and contact persons.
In addition, registered customers can also access the MySIPLACE user group. Here, you can
access special information about our placement systems, e.g.:
●
Technical documentation
●
Technical information
●
Spare parts lists
Registration for the MySIPLACE user group is very simple:
► Click on MyASM and then on Registrieren.
► Fill in the registration form and send it off to us.
Soon afterwards, you will receive your access authorization with user name and password.
2 Operational safety
2.1 Safety Instructions
User Manual / Bedienungsanleitung SIPLACE Single Slot Interface 05/2021 39
2 Operational safety
2.1 Safety Instructions
DANGER
Nonobservance of these safety instructions may cause injury to personnel and dam-
age to the machine!
► Please observe the safety instructions in the user manual of the relevant machine
for all work!
2.1.1 Conventions for the use of safety instructions and symbols
Safety instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid
damage to equipment. These notes are highlighted by warning triangles and are indicated as fol-
lows according to the level of risk:
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property
may occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indic-
ates a part of the manual that requires particular attention.
Symbols
Example Description
Next This typeface marks controls and interface elements in the software.
► This symbol indicates actions that have to be performed by the operator.
2.1.2 Staff Qualifications and Training
Qualified or adequately trained personnel means that these people are familiar with the setting up,
operation and maintenance and are suitably qualified, e.g.:
●
Have been trained, instructed or authorized to switch on and off, isolate, earth and identify
electrical circuits and system components in accordance with normal safety standards.
●
Have been trained or instructed in the upkeep and use of appropriate safety equipment in
accordance with normal safety standards.
●
Have received first aid training.