00193875-01.pdf - 第51页

SIPLACE Software Guide Version 101.xx 4 Switching the SIPLACE line on and off Issue 05/03 EN 4.2 Switching off the SIPLACE line 51 Æ Close down the st ation computer software by selecting Mode --> Shut down comput er …

4 Switching the SIPLACE line on and off SIPLACE Software Guide Version 101.xx

4.2 Switching off the SIPLACE line Issue 05/03 EN

4.2 Switching off the SIPLACE line

CAUTION

Before you switch off the line, ALWAYS make sure that: 4

– All placement operations on the stations have been completed

– The z-axis of all placement heads are in the top end position

– None of the placement heads still contain components

– All gantries have moved into the standby position

– The station computers have been properly shut down.

4.2.1 Switching off SIPLACE C Pro (Windows)

Æ Select Item --> Exit from the SIPLACE C Pro menu bar.

Æ Close all other programs on the computer.

Æ Select Shutdown from the Windows Start menu.

4.2.2 Switching off the stations

Proceed as follows to switch off the station: 4

Æ Terminate all placement operations.

Æ Check to make sure that the z-axes of all placement heads are in the top end position.

Æ Check to see if there are components in the placement heads and, if necessary, remove.

Æ If necessary, move all gantries to the waiting position with the help of the corresponding gantry

functions (see the user manual for your machine).

NOTE

Gantries are usually moved automatically to the waiting position. 4

SIPLACE Software Guide Version 101.xx 4 Switching the SIPLACE line on and off

Issue 05/03 EN 4.2 Switching off the SIPLACE line

Æ Close down the station computer software by selecting Mode --> Shut down computer....

Æ Wait until the computer has shut down completely, and then switch off the station at the main

switch.

NOTE

Wait for about 30 seconds before switching on the station again. 4

4 Switching the SIPLACE line on and off SIPLACE Software Guide Version 101.xx

4.2 Switching off the SIPLACE line Issue 05/03 EN