YS100_Ope_E.pdf - 第114页

2-47 2  asic operation 4.3.3 Replacing a magazine or pallets during operation (dYTF) T he dYTF allows you to replace a magazine or pallets even w hen the mounter is operating. Y ou can make setup for tra y components wi…

100%1 / 159
2-46
2
asic operation
4
Insert all the required pallets into the correct magazine shelves.
n
NOTE
• Labelswithblackandsilvernumbersareafxedtobothsidesofthemagazinetoshowtheshelfnumberand
prevent inserting a pallet into the wrong position.
• Insertthepalletintotheshelfthatwassetinthe"PalletNo.Start"and"PalletNo.End"parametersinthe[Parts]-[Tray]
information.
Pallet insertion shelf number
23222-L1-00
5
Close the pallet retainer door.
Close the door while depressing the latch levers.
2-47
2
asic operation
4.3.3 Replacing a magazine or pallets during operation (dYTF)
The dYTF allows you to replace a magazine or pallets even when the mounter is operating. You can make setup
for tray components without decreasing the rate of production. (Magazine being used during operation cannot
be replaced.)
This section explains how to replace a magazine or pallets.
1
Set the door switch for the magazine you want to replace to "OPEN".
The magazine door unlocks and the door switch lamp turns off.
Door switch
Door switch
23223-L1-00
2
Open the magazine door.
Pull down the handle to open the magazine door for the magazine you want to replace.
3
Unclamp the magazine.
Turn the clamp lever to the left while pulling it.
Magazine clamp
Turn the clamp lever to the left to unclamp the magazine.
23225-L1-10
2-48
2
asic operation
4
Replace the pallets (when replacing pallets only).
Proceed to step 5 when replacing the magazine.
1. Open the pallet retainer door.
Open the pallet retainer door while depressing the latch levers.
2. Replace the pallets.
3. Return the pallet retainer door to the original position.
Replace the pallets
Latch levers
Pallet retainer door
23238-L1-00
5
Pull out the entire magazine.
Holding the handle on the pallet retainer door, slowly pull the magazine straight out.
Pulling out the magazine
Guide
23226-L1-10