YS100_Ope_E.pdf - 第125页
Chapter 3 Star ting and ending production Contents 1. Starting production 3- 1 1.1 Resuming operation from the stopped point 3- 6 1.1.1 Loading the saved data 3- 7 1.1.2 Editing mount flags 3- 7 1.2 Using the "block…
2-57
2
asic operation
n
Checking the tray changer operation (sATS)
1
Open the tray changer screen.
Press the [Unit] button and then select the [Auto TC] tab to open the tray changer screen.
2
Extract a pallet from the tray changer.
Press the [Pallet Set] button to check whether a pallet is correctly extracted from the tray changer.
Tray changer screen
Selecting a pallet (sATS)
[Pallet Set] button
Enter a pallet number
24234-L1-00
n
Checking the tray changer operation (dYTF)
1
Open the tray changer screen.
Press the [Unit] button and then select the [Ext.TC] tab to open the tray changer screen.
2
Extract a pallet from the tray changer.
Open the [View2] tab. Press the [Pallet Set] button to check whether a pallet is correctly extracted from
the tray changer.
Tray changer screen
Selecting a pallet (dYTF)
[Pallet Set] button
Enter a pallet number
24235-L1-00
Chapter 3 Starting and ending production
Contents
1. Starting production 3-1
1.1 Resuming operation from the stopped point 3-6
1.1.1 Loading the saved data 3-7
1.1.2 Editing mount flags 3-7
1.2 Using the "block skip function" 3-8
1.2.1 Selecting the blocks 3-9
1.2.2 Starting operation 3-10
2.
Ending production and turning power off
3-11
3
3.1 Production 3-13
5
7
9
3.5 Alignment 3-21
3.6 Retry 3-22
3
4
5
3.10 Pick Rate Warning 3-27
3.11 Coplanarity checker 3-30
3-1
3
Starting and ending production
1. Starting production
This section describes how to select the board data which is already registered and perform component
mounting.
1
Select the board data.
1. When the board data is not yet selected, press the [Board] button on the Setup screen.
A list of registered board data appears.
2. Line up the cursor with the board data to use for production and press the [Select] button.
The machine loads the seleted board data.
Selecting the board data
Select board data from list.
Press [Board] button.
Selected board name is displayed.
24300-L1-00