00197193-02_IM_SIPLACE_EDM_2.1_EN.pdf - 第22页

EDM V2.1 / I nstallat ion Ma nual Ausgabe 11/2012 E dition 22 4.3.3 St ep - by - step upgrade of individual lines Since it is no t a l wa ys possi ble to perf orm a sim ultaneous upgrade ac ross all the lines, EDM provid…

EDM V2.1 / Installation Manual Ausgabe 11/2012 Edition

4.3 Upgrading from a previous version

4.3.1 Conditions / downward compatibility

Installing different versions of EDM on Master and Client should be avoided. If different versions of

SIPLACE Pro are used on the EDM Master and the EDM lines, some restrictions apply because

the format of the data transferred depends on the SIPLACE Pro version used. During an upgrade,

the Master Server, all Line Servers and all Clearing Pools must therefore be converted to EDM 2.1

(and thus to SIPLACE Pro 10.1).

EDM 2.1 can use all templates that were created for EDM 1.1 or later, as well as custom workflows

from EDM 1.1 or later.

CAUTION

Please read section 5.3.7, Notifications/Rules… before converting any filter from EDM

2.0 or earlier to EDM 2.1.

Existing filter settings on the EDM Master are retained and updated, but it is recommended that

you manually inspect the converted file (it may be that your own custom changes have been

superseded by improvements to the default configuration).

4.3.2 Simultaneous upgrade over all lines

Where possible, production on all the lines to be upgraded should be suspended for the duration of

the upgrade. As soon as all the components have been converted, production can be restarted.

Perform the upgrade operation as follows:

1. Interrupt production on all the lines to be upgraded.

2. Transfer all notifications from the Line Servers to the Master Server.

3. Accept/reject all notifications in the Clearing Pool.

4. Close all EDM applications.

5. Install SIPLACE Pro and then the EDM Master Server (with Configuration Server) on the

Master Server.

6. Install SIPLACE Pro and then EDM Line Server on all lines. After installing an EDM Line

Server, the production on that EDM Line can be resumed immediately.

CAUTION

To avoid all notifications still in the Clearing Pool from being lost, the EDM database

must not be deleted.

7. Resume production.

Simultaneous upgrade across all the lines is to be preferred to a step-by-step upgrade of individual

lines (insofar as this is possible).

EDM V2.1 / Installation Manual Ausgabe 11/2012 Edition

4.3.3 Step-by-step upgrade of individual lines

Since it is not always possible to perform a simultaneous upgrade across all the lines, EDM

provides a step-by-step upgrade procedure that permits restricted operation of an EDM 2.1 Line

Server in conjunction with a Master Server from an earlier version for the duration of the upgrade.

CAUTION

This compatibility mode should not be used for long-term mixed operation of an EDM 2.1

Line Server with a Master Server from an earlier version of EDM.

During the step-by-step upgrade, it is still possible for an EDM Line Server to pull/push data from

the Master Server. However, it is not possible to transfer modified objects into the Master Server.

All the notifications that arise during that period are saved in the Clearing Pool and can be

transferred to the EDM Master Server when the step-by-step upgrade has been terminated by

upgrading the Master Server.

It is recommended to carry out gradual upgrading of individual lines as follows:

1. Prepare another computer to hold a temporary, standalone EDM Configuration Server

(EDM 2.1) and run the EDM Configuration Server setup type EDM Configuration Server.

If another computer or virtual machine is not available, the Configuration Server may be

installed along with the first upgraded EDM Line in step 5.

2. Interrupt production on one of the lines to be upgraded.

3. Transfer all notifications from the Line Server of this line to the Master Server.

4. Upgrade SIPLACE Pro to the new version on the Line Server of this line.

5. Install the EDM Line on the Line Server of this line and make it using the standalone

configuration server. If you have chosen not to use a standalone server for upgrading the

first Line server, proceed as follows instead:

► Select the "EDM Line" and "Configuration Server" options within the "Custom

Setup" setup, in order to provide a Configuration Server.

6. If the old version already uses a Configuration Server (e.g. EDM 2.0), run the script

MoveEdmConfigServer.bat, located in the Tools subdirectory of the EDM installation

path, on the temporary Configuration Server to move all the EDM Clients attached to the

old configuration server as well as all configuration settings to the temporary EDM 2.1

Configuration Server.

7. Resume production on this line.

EDM Master

Configuration Server

(old Version)

Edm Line (old Version)

Edm Line (new Version)

EDM Configuration Server (new Version)

MoveEdmConfigServer.bat

Figure

4-9Configuration Server ditribution after step 6, if upgrading from EDM 2.0

EDM V2.1 / Installation Manual Ausgabe 11/2012 Edition

8. Repeat steps 1-5 for the other lines to be upgraded.

As soon as each EDM Line Server has been upgraded, you should proceed to update the EDM

Master:

CAUTION

To avoid all notifications still in the Clearing Pool from being lost, the EDM database

must not be deleted.

9. Shut down the EDM service and stop all EDM applications on the Master Server.

10. Upgrade SIPLACE Pro on the Master Server.

11. Upgrade SIPLACE EDM on the EDM Master Server using the EDM Master or EDM

Master with Clearing Pool setup type.

NOTICE

You might also want to keep the current configuration server. In this case, select

“Custom Setup” and choose the EDM Master and – if needed – the EDM ClearingPool

option, but leave the Configuration Server checkbox unchecked. Step 13

should be

omitted then.

12. Restart the Master Server.

13. Conclude the transition to the new Configuration Server instance with one of these options:

► Manually change the Configuration Server setting on all EDM Lines that used the

temporary Configuration Server to point to the Master Configuration Server, cf.

section 5.3.8.1

► Run the script MoveEdmConfigServer.bat, located in the Tools subdirectory

of the EDM installation path, on the new Configuration Server to move all the EDM

Clients attached to the temporary configuration server as well as all configuration

settings to the local Configuration Server.

CAUTION

This script deletes all settings on the local configuration server, overwriting them with

copies of the source configuration server.

EDM Master

EDM Configuration Server (new

Version)

EDM Line (new Version)

EDM Configuration Server (new Version)

MoveEdmConfigServer.bat

EDM Line (new Version)

Figure

4-10Configuration Server distribution after migration to latest version of EDM