00197193-02_IM_SIPLACE_EDM_2.1_EN.pdf - 第23页
EDM V2.1 / I nstallat ion Ma nual Ausgabe 11/2012 E dition 23 8. Repeat s teps 1 - 5 f or the ot her lines t o be upgrad ed . As soo n as each EDM Line Server has been upgrad ed, you s hould proc eed to up date the ED M …
EDM V2.1 / Installation Manual Ausgabe 11/2012 Edition
22
4.3.3 Step-by-step upgrade of individual lines
Since it is not always possible to perform a simultaneous upgrade across all the lines, EDM
provides a step-by-step upgrade procedure that permits restricted operation of an EDM 2.1 Line
Server in conjunction with a Master Server from an earlier version for the duration of the upgrade.
CAUTION
This compatibility mode should not be used for long-term mixed operation of an EDM 2.1
Line Server with a Master Server from an earlier version of EDM.
During the step-by-step upgrade, it is still possible for an EDM Line Server to pull/push data from
the Master Server. However, it is not possible to transfer modified objects into the Master Server.
All the notifications that arise during that period are saved in the Clearing Pool and can be
transferred to the EDM Master Server when the step-by-step upgrade has been terminated by
upgrading the Master Server.
It is recommended to carry out gradual upgrading of individual lines as follows:
1. Prepare another computer to hold a temporary, standalone EDM Configuration Server
(EDM 2.1) and run the EDM Configuration Server setup type EDM Configuration Server.
If another computer or virtual machine is not available, the Configuration Server may be
installed along with the first upgraded EDM Line in step 5.
2. Interrupt production on one of the lines to be upgraded.
3. Transfer all notifications from the Line Server of this line to the Master Server.
4. Upgrade SIPLACE Pro to the new version on the Line Server of this line.
5. Install the EDM Line on the Line Server of this line and make it using the standalone
configuration server. If you have chosen not to use a standalone server for upgrading the
first Line server, proceed as follows instead:
► Select the "EDM Line" and "Configuration Server" options within the "Custom
Setup" setup, in order to provide a Configuration Server.
6. If the old version already uses a Configuration Server (e.g. EDM 2.0), run the script
MoveEdmConfigServer.bat, located in the Tools subdirectory of the EDM installation
path, on the temporary Configuration Server to move all the EDM Clients attached to the
old configuration server as well as all configuration settings to the temporary EDM 2.1
Configuration Server.
7. Resume production on this line.
EDM Master
Configuration Server
(old Version)
Edm Line (old Version)
Edm Line (old Version)
Edm Line (new Version)
EDM Configuration Server (new Version)
MoveEdmConfigServer.bat
Figure
4-9Configuration Server ditribution after step 6, if upgrading from EDM 2.0
EDM V2.1 / Installation Manual Ausgabe 11/2012 Edition
23
8. Repeat steps 1-5 for the other lines to be upgraded.
As soon as each EDM Line Server has been upgraded, you should proceed to update the EDM
Master:
CAUTION
To avoid all notifications still in the Clearing Pool from being lost, the EDM database
must not be deleted.
9. Shut down the EDM service and stop all EDM applications on the Master Server.
10. Upgrade SIPLACE Pro on the Master Server.
11. Upgrade SIPLACE EDM on the EDM Master Server using the EDM Master or EDM
Master with Clearing Pool setup type.
NOTICE
You might also want to keep the current configuration server. In this case, select
“Custom Setup” and choose the EDM Master and – if needed – the EDM ClearingPool
option, but leave the Configuration Server checkbox unchecked. Step 13
should be
omitted then.
12. Restart the Master Server.
13. Conclude the transition to the new Configuration Server instance with one of these options:
► Manually change the Configuration Server setting on all EDM Lines that used the
temporary Configuration Server to point to the Master Configuration Server, cf.
section 5.3.8.1
► Run the script MoveEdmConfigServer.bat, located in the Tools subdirectory
of the EDM installation path, on the new Configuration Server to move all the EDM
Clients attached to the temporary configuration server as well as all configuration
settings to the local Configuration Server.
CAUTION
This script deletes all settings on the local configuration server, overwriting them with
copies of the source configuration server.
EDM Master
EDM Configuration Server (new
Version)
EDM Line (new Version)
EDM Configuration Server (new Version)
MoveEdmConfigServer.bat
EDM Line (new Version)
EDM Line (new Version)
Figure
4-10Configuration Server distribution after migration to latest version of EDM
EDM V2.1 / Installation Manual Ausgabe 11/2012 Edition
24
5 Configuration
5.1 Settings in SIPLACE Pro Desk
To guarantee proper operation of SIPLACE EDM, it is necessary to change some settings in
SIPLACE Pro Desk.
● SIPLACE EDM associates objects on the Master Server and the Line Servers using their
names, i.e. an object must have the same name on all computers. It is recommended that you
suppress the ability to rename and create objects on EDM lines using the user permissions
management facilities in SIPLACE Pro.
● The Vision Data Manager (VDM) must be activated on all SIPLACE Pro Desk installations that
are to participate in EDM to allow Vision data (BLOBs), camera parameters and illumination
parameters to be processed for the line and the station.
● Some settings for SIPLACE Pro Desk (under Tools – Settings - General Settings) must be
consistent across all EDM Client computers and the EDM Master. Currently, this only applies to
the two options for the extended custom nozzle number range (Twin Head and CPP head)
5.2 EDM-specific settings
CAUTION
After any change has been made (and saved) to the configuration, the changes will
immediately be distributed to each connected EDM service.
5.2.1 Basic EDM Configuration Dialogs
During the setup procedure, the user might want to adjust several vital settings. Based on the setup
type, two different dialogs are available
5.2.1.1 Basic Configuration for Configuration Server
The Configuration Server Basic Configuration dialog is presented during the setup procedure. If
needed, the dialog is recalled via the Edm Post-Configuration Tool shortcut in the
SIPLACE EDM\Administration start menu.