Anritsu_MG3692C.PDF - 第16页

1 1410-00515, Rev . B Printed in United States 2010-06 ©2010 Anritsu Company . All Rights Reserved ® Anritsu All trademarks are registered trademarks of their respective companies. Data subject to change without notice. …

100%1 / 16
14
Ordering Information
Models
MG3691C 2 GHz - 10 GHz Signal Generator
MG3692C 2 GHz - 20 GHz Signal Generator
MG3693C 2 GHz - 31.8 GHz Signal Generator
MG3694C 2 GHz - 40 GHz Signal Generator
MG3695C 2 GHz - 50 GHz Signal Generator
MG3697C 2 GHz - 67 GHz Signal Generator (operational to 70 GHz)
Options and Accessories
MG3690C/1A Rack Mount with slides – Rack mount kit containing a set of track
slides (90 degree tilt capability), mounting ears, and front panel
handles to let the instrument be mounted in a standard 19-inch
equipment rack.
MG3690C/1B Rack Mount without slides – Modifies rack mounting hardware
to install unit in a console that has mounting shelves. Includes
mounting ears and front panel handles.
MG3690C/2A Mechanical Step Attenuator – Adds a 10 dB/step attenuator.
MG3690C/2B Rated RF output power is reduced. (This option comes in
MG3690C/2C different versions, based on instrument configuration)
MG3690C/2E Electronic Step Attenuator – Adds a 10 dB/step electronic attenuator
with a 120 dB range for the MG3691C. Rated RF output power
is reduced. (Not available with Option 20 or 22)
MG3690C/3 Ultra Low Phase Noise – Adds new modules to significantly reduce
SSB phase noise. (Not available with Option 3X)
MG3690C/3X Premium Phase Noise, improves Option 3 (< 1 kHz offset).
(Not available with Option 3)
MG3690C/4 8 MHz to 2.2 GHz RF coverage, Ultra-Low Phase Noise
version – Uses a digital down converter to significantly reduce
SSB phase noise. All specifications apply ≥ 10 MHz.
MG3690C/5 8 MHz to 2 GHz RF coverage – Uses an analog down converter.
All specifications apply ≥ 10 MHz.
MG3690C/6 Analog Sweep Capability – (limited to ≥ 500 MHz when used
with Option 4)
MG3690C/7 IF Up-Conversion – Adds an internal 40 GHz mixer for up-converting
an IF signal. (Not available with MG3695C, MG3696C, or
with Options 18 or 20)
MG3690C/8 Power Monitor – Adds internal power measurement capability.
(Not available with Option 9)
MG3690C/9K Rear Panel Output – Moves the RF output connector to the rear
MG3690C/9V panel. (This option comes in different versions, based on instrument
configuration) (Not available with Option 8)
MG3690C/10 User-Defined Modulation Waveform Software – External software
package provides the ability to download user-defined waveforms
into the memory of the internal waveform generator, serially or via
GPIB. External PC and an instrument with LF Generator, Option 27,
are required.
MG3690C/12 Frequency and Phase Modulation – External, via a rear panel BNC
connector. For internal modulation capability, requires additionally
LF Generator, Option 27.
MG3690C/14 Amplitude Modulation – External, via a rear panel BNC connector.
For internal modulation capability, requires additionally
LF Generator, Option 27.
MG3690C/15A High Power – Adds high-power RF components to the instrument
MG3690C/15B to increase its output power level.
MG3690C/15C (This option comes in different versions, based on instrument
MG3690C/15D configuration)
MG3690C/16 High Stability Time Base – Adds an ovenized, 10 MHz
crystal oscillator as a high-stability time base.
MG3690C/17 Delete Front Panel – Deletes the front panel for use in remote
control applications where a front panel display and keyboard control
are not needed. (Only available with Options 1A or 1B)
MG3690C/18 mmW Bias Output – Adds a rear panel BNC Twinax connector
required to bias the 63850 series millimeter wave source modules,
sold separately. Includes DC bias cable. (Not available with
Option 7 or 15x)
MG3690C/20 Scan Modulation – Adds an internal Scan modulator for
simulating high-depth amplitude modulated signals. Requires an
external modulating signal input capability. (Not available on models
MG3693C, MG3694C, MG3695C, MG3696C, or with Options 2E,
7, 15X, or 22)
MG3690C/22 0.1 Hz to 10 MHz Audio coverage – Uses a DDS for coverage down
to approximately DC. When adding Option 22, the output power is
derated by 2 dB. The frequency resolution below 10 MHz is 0.02 Hz.
No modulation is available in the 0.1 Hz to 10 MHz band.
(Not available without Option 4 or 5, or with Option 20 or 2E)
MG3690C/26A Pulse Modulation – External, via a rear panel BNC connector.
MG3690C/26B For internal modulation capability, requires additionally Pulse
Generator, Option 27. (This option comes in different versions,
based on instrument configuration)
MG3690C/27 Internal LF and Pulse Generators – Provides modulation waveforms
for internal AM, FM, ΦM and Pulse. (Not available without
Option 12, 14, or 26)
MG3690C/28A Analog Modulation Suite – For ease of ordering and package
MG3690C/28B pricing, this option bundles Options 12, 14, 26 and 27, offering
internal and external AM, FM, ΦM, and Pulse Modulation.
(This option comes in different versions, based on
instrument configuration)
Millimeter Wave Accessories
(Option 18 recommended for DC bias)
63850-15 50 GHz - 75 GHz V band Multiplier Source Module, WR-15
63850-12 60 GHz - 90 GHz E band Multiplier Source Module, WR-12
63850-10 75 GHz - 110 GHz W band Multiplier Source Module, WR-10
63850-08 90 GHz - 140 GHz F band Multiplier Source Module, WR-08
63850-06 110 GHz - 170 GHz D band Multiplier Source Module, WR-06
63850-05 140 GHz - 220 GHz G band Multiplier Source Module, WR-05
63850-03 220 GHz - 325 GHz H band Multiplier Source Module, WR-03
806-121 SMA male-male flexible cable, 90 cm (3 ft) (could be used to
connect the MG3690C output to the module's LO input)
Accessories
34RKNF50 DC to 20 GHz, Ruggedized Type N female adapter for units with
a K connector output
ND36329 MASTER/SLAVE interface cable set
63270 Transit case (16 kg, 66 cm x 41 cm x 81 cm, roll-away on four wheels)
2300-469 IVI Driver, includes LabView
®
driver
806-97 Aux I/O Cable, 25 pin to BNC: Provides BNC access to
Aux I/O Data Lines: Sequential Sync, Marker Out, Bandswitch
Blanking, Retrace Blanking, Sweep Dwell In, V/GHz, Horizontal Out.
Upgrades
Economical upgrades are available to upgrade any model to any higher performing
model. Consult Anritsu for details.
15
MODELS
OPTIONS
OPT 1 OPT 2
OPT
3
OPT
3X
OPT
4
OPT
5
OPT
6
OPT
7
OPT
8
OPT 9
OPT
10
OPT
12
OPT
14
1A 1B 2A 2B 2C 2E 9K 9V
MG3691C
• • • •
9,11
•
13
•
13
•
1
•
1
• •
2,12
•
8
•
8
•
3
• •
MG3692C
• • • •
13
•
13
•
1
•
1
• •
2,12
•
8
•
8
•
3
• •
MG3693C
• • • •
13
•
13
•
1
•
1
• •
2,12
•
8
•
8
•
3
• •
MG3694C
• • • •
13
•
13
•
1
•
1
• •
2,12
•
8
•
8
•
3
• •
MG3695C
• • • •
13
•
13
•
1
•
1
• •
8
•
8
•
3
• •
MG3697C
• • • •
13
•
13
•
1
•
1
• •
8
•
8
•
3
• •
MODELS
OPTIONS
OPT 15
OPT
16
OPT
17
OPT
18
OPT
20
OPT
22
OPT 26
OPT
27
OPT 28
OPT
98
OPT
99
15A 15B 15C 15D 26A 26B 28A 28B
MG3691C
•
12
• •
10
•
2,12
•
9
•
5,11
• •
6
•
7
• •
MG3692C
•
12
• •
10
•
2,12
•
9
•
5
• •
6
•
7
• •
MG3693C
•
12
• •
10
•
2,12
•
5
• •
6
•
7
• •
MG3694C
•
12
• •
10
•
2,12
•
5
• •
6
•
7
• •
MG3695C
•
12
• •
10
•
12
•
5
• •
6
•
7
• •
MG3697C
•
12
• •
10
• •
5
• •
6
•
7
• •
Footnote 1 Options 4 and 5 CAN NOT be ordered together
Footnote 2 Options 7 and 18 CAN NOT be ordered together
Options 7 and 20 CAN NOT be ordered together
Footnote 3 Option 10 CAN ONLY be ordered with either Options 27 or 28
Footnote 5 Option 22 CAN ONLY be ordered with either Options 4 or 5
Option 22 CAN NOT be ordered with Option 20
Footnote 6 Option 27 CAN ONLY be ordered with either Options 12, 14 or 26
(in any combination)
Footnote 7 Option 28 CAN NOT be ordered along with either Options 12, 14, 26, or 27
Footnote 8 Option 8 CAN NOT be ordered along with Option 9
Footnote 9 Option 20 CAN NOT be ordered with Option 2E, Option 7,
Option 15 or Option 22
Footnote 10 Option 17 CAN ONLY be ordered with either Option 1A or 1B
Footnote 11 Option 2E CAN NOT be ordered with Option 22
Footnote 12 Option 18 CAN NOT be ordered with Option 15 or 7,
Option 15 CAN NOT be ordered with Option 20
Footnote 13 Option 3 CAN NOT be ordered with Option 3X and visa versa.
MG3690C OPTION CONFIGURATION GUIDE – Important: Please see footnotes where applicable
11410-00515, Rev. B Printed in United States 2010-06
©2010 Anritsu Company. All Rights Reserved
® Anritsu All trademarks are registered trademarks of
their respective companies. Data subject to change
without notice. For the most recent specifications visit:
www.anritsu.com
Anritsu Corporation
5-1-1 Onna, Atsugi-shi, Kanagawa, 243-8555 Japan
Phone: +81-46-223-1111
Fax: +81-46-296-1264
• U.S.A.
Anritsu Company
1155 East Collins Boulevard, Suite 100,
Richardson, Texas 75081 U.S.A.
Toll Free: 1-800-ANRITSU (267-4878)
Phone: +1-972-644-1777
Fax: +1-972-671-1877
• Canada
Anritsu Electronics Ltd.
700 Silver Seven Road, Suite 120, Kanata,
Ontario K2V 1C3, Canada
Phone: +1-613-591-2003
Fax: +1-613-591-1006
• Brazil
Anritsu Electrônica Ltda.
Praça Amadeu Amaral, 27 - 1 Andar
01327-010 - Bela Vista - São Paulo - SP - Brasil
Phone: +55-11-3283-2511
Fax: +55-11-3288-6940
• Mexico
Anritsu Company, S.A. de C.V.
Av. Ejército Nacional No. 579 Piso 9, Col. Granada
11520 México, D.F., México
Phone: +52-55-1101-2370
Fax: +52-55-5254-3147
• U.K.
Anritsu EMEA Ltd.
200 Capability Green, Luton, Bedfordshire LU1 3LU, U.K.
Phone: +44-1582-433280
Fax: +44-1582-731303
• France
Anritsu S.A.
12 Avenue du Québec,
Bâtiment Iris 1-Silic 638,
91140 VILLEBON SUR YVETTE, France
Phone: +33-1-60-92-15-50
Fax: +33-1-64-46-10-65
• Germany
Anritsu GmbH
Nemetschek Haus, Konrad-Zuse-Platz 1
81829 München, Germany
Phone: +49 (0) 89 442308-0
Fax: +49 (0) 89 442308-55
• Italy
Anritsu S.p.A.
Via Elio Vittorini, 129, 00144 Roma, Italy
Phone: +39-06-509-9711
Fax: +39-06-502-2425
• Sweden
Anritsu AB
Borgafjordsgatan 13, 164 40 Kista, Sweden
Phone: +46-8-534-707-00
Fax: +46-8-534-707-30
• Finland
Anritsu AB
Teknobulevardi 3-5, FI-01530 Vantaa, Finland
Phone: +358-20-741-8100
Fax: +358-20-741-8111
• Denmark
Anritsu A/S (for Service Assurance)
Anritsu AB (Denmark) (for Test &
Measurement except Service Assurance)
Kirkebjerg Allé 90 DK-2605 Brøndby, Denmark
Phone: +45-7211-2200
Fax: +45-7211-2210
• Russia
Anritsu EMEA Ltd.
Representation Office in Russia
Tverskaya str. 16/2, bld. 1, 7th floor.
Russia, 125009, Moscow
Phone: +7-495-363-1694
Fax: +7-495-935-8962
• United Arab Emirates
Anritsu EMEA Ltd.
Dubai Liaison Office
P O Box 500413 - Dubai Internet City
Al Thuraya Building, Tower 1, Suite 701, 7th Floor
Dubai, United Arab Emirates
Phone: +971-4-3670352
Fax: +971-4-3688460
• Singapore
Anritsu Pte. Ltd.
60 Alexandra Terrace, #02-08, The Comtech (Lobby A)
Singapore 118502
Phone: +65-6282-2400
Fax: +65-6282-2533
• India
Anritsu Pte. Ltd.
India Branch Office
3rd Floor, Shri Lakshminarayan Niwas,
#2726, 80 ft Road, HAL 3rd Stage, Bangalore - 560 075, India
Phone: +91-80-4058-1300
Fax: +91-80-4058-1301
• P. R. China (Hong Kong)
Anritsu Company Ltd.
Units 4 & 5, 28th Floor, Greenfield Tower, Concordia Plaza,
No. 1 Science Museum Road, Tsim Sha Tsui East,
Kowloon, Hong Kong, P.R. China
Phone: +852-2301-4980
Fax: +852-2301-3545
• P. R. China (Beijing)
Anritsu Company Ltd.
Beijing Representative Office
Room 2008, Beijing Fortune Building,
No. 5 , Dong-San-Huan Bei Road,
Chao-Yang District, Beijing 100004, P.R. China
Phone: +86-10-6590-9230
Fax: +86-10-6590-9235
• Korea
Anritsu Corporation, Ltd.
8F Hyunjuk Bldg. 832-41, Yeoksam-Dong,
Kangnam-ku, Seoul, 135-080, Korea
Phone: +82-2-553-6603
Fax: +82-2-553-6604
• Australia
Anritsu Pty Ltd.
Unit 21/270 Ferntree Gully Road, Notting Hill
Victoria, 3168, Australia
Phone: +61-3-9558-8177
Fax: +61-3-9558-8255
• Taiwan
Anritsu Company Inc.
7F, No. 316, Sec. 1, Neihu Rd., Taipei 114, Taiwan
Phone: +886-2-8751-1816
Fax: +886-2-8751-1817