Printer 600 Paste Dispenser System.pdf - 第10页
3$67(',6 3(16(56< 67(0 6(48(1&(6 10.10 Technical Reference Manual Chapter Issue 2 Jul 02 6. The p aste dispenser is driven to the centre. 7. The dispensi ng unit is rot ated to the hori zontal posi tion, as…
3$67(',63(16(56<67(0
6(48(1&(6
Chapter Issue 2 Jul 02 Technical Reference Manual 10.9
3. The paste dispenser is driven to the paste start position.
4. Pneumatic pressure is applied to the paste dispenser cartridge. Paste is
applied to the stencil.
5. The paste dispenser is driven across the screen to the paste stop position,
dispenser movement is halted and pneumatic pressure is removed.
Board
Stencil
Pneumatic Connection
3$67(',63(16(56<67(0
6(48(1&(6
10.10 Technical Reference Manual Chapter Issue 2 Jul 02
6. The paste dispenser is driven to the centre.
7. The dispensing unit is rotated to the horizontal position, as set by the up
adjustable hard stop. The vane enters the sensor stopping the tilt motor.
During rotation a series of motor reversals is carried out to remove excess
paste from the nozzle.
8. The paste dispenser is driven to the home position. The nozzle is sealed
against the spring loaded paste seal.
Vane
Stop
Sensor
Paste Seal
Nozzle
3$67(',63(16(56<67(0
6(48(1&(6
Chapter Issue 2 Jul 02 Technical Reference Manual 10.11
NOTE
1. The paste start and paste stop positions are held in the product file. The
default positions are set by the board length. These positions can be
customized in the edit data menu.
2. An alternate paste dispense can be set to apply paste to either the centre
50% or end 25% of the standard dispense. The ratio of alternate to standard
dispenses can also be set.
3. The speed of the paste dispenser, driven between the paste start and paste
stop positions, is programmable and determines the volume of paste
applied.
4. The paste dispense position can be set to either the front or rear of the
image.
5. Paste can be dispensed with a board loaded and held at print height. This
overcomes the problem of paste dropping from the squeegees or paste
dispenser onto and through the image.