00198351-01_AI_Location 2 Upgrade Kit_E by SIPLACE_en.pdf - 第15页
Assembly Instructions E by SIPLACE Location 2 Upgrade Kit 04/2017 2 Installation of Location 2 Upgrade Kit 2.2 Installing the Cable Branch Option, Location 2 HMI Extension andE‑SeriesHMITowerKit 15 2.2 Installing the…
2 Installation of Location 2 Upgrade Kit
2.1 Preparing Steps
Assembly Instructions E by SIPLACE
Location 2 Upgrade Kit 04/2017
14
► Remove the Location 2 safety plate [03110130-xx].
► Remove the seven covers from location 2 as shown.
► Remove the side cover and cover from location 1 as shown.
Assembly Instructions E by SIPLACE
Location 2 Upgrade Kit 04/2017
2 Installation of Location 2 Upgrade Kit
2.2 Installing the Cable Branch Option, Location 2 HMI Extension
andE‑SeriesHMITowerKit
15
2.2 Installing the Cable Branch Option, Location 2 HMI
Extension andE‑SeriesHMITowerKit
► Install the Cable branch option, location 2 HMI extension [03107735-xx] and E-Series HMI
Tower Kit [03109055‑xx] as per assembly instruction "2
nd
HMI and tower light for E-
series" [00197962‑xx].
► Connect the Cable [03105944-xx], control:
tape cutter 2 to the IOCU and route the
cable to location 2 of the machine.
NOTICE!
Pay attention to the orientation
of the release handle.
.
► Install the cable assembly base interface COT [03104481-xx] at the indicated area of
location 2.
► Connect the cable to the connections found in the compartment behind the cable housing.
2 Installation of Location 2 Upgrade Kit
2.2 Installing the Cable Branch Option, Location 2 HMI Extension
andE‑SeriesHMITowerKit
Assembly Instructions E by SIPLACE
Location 2 Upgrade Kit 04/2017
16
► Connect the tube INPUT-PSU_P6
[03111726-xx] to the highlighted port of
the Air Service Unit (port6).
► Route the tubing up through the in-
dicated hole and leave it there.
► Connect the tube "Tube Tape Cutter Location 2" [03102148-xx] to the highlighted port of the
Air Service Unit (portT2).