00198351-01_AI_Location 2 Upgrade Kit_E by SIPLACE_en.pdf - 第23页
Assembly Instructions E by SIPLACE Location 2 Upgrade Kit 04/2017 2 Installation of Location 2 Upgrade Kit 2.3 Recommended Installation Steps 23 ► Route the Tube TEE_R2-RET_R (port D2) [03111722-xx], B_TOP-EXT_R (port B1…
2 Installation of Location 2 Upgrade Kit
2.3 Recommended Installation Steps
Assembly Instructions E by SIPLACE
Location 2 Upgrade Kit 04/2017
22
► Install the pneumatic tubes as per drawing [03108761-010203ZD2].
► Connect the tubing INPUT-PSU_P6 [03111726-xx] (as mentioned in point 7) from the air ser-
vice unit to port A (refer to drawing).
► Connect the rest of the pneumatic tubes accordingly.
Assembly Instructions E by SIPLACE
Location 2 Upgrade Kit 04/2017
2 Installation of Location 2 Upgrade Kit
2.3 Recommended Installation Steps
23
► Route the Tube TEE_R2-RET_R (port D2)
[03111722-xx], B_TOP-EXT_R (port B1)
[03111720-xx] and PUSH-OUT_R (port
D3) [03111724-xx] through the slot hole on
Top panel cover 4 [03106625‑xx].
► Take note of the tube routing for 2B_BTM-EXT_R (port B2) [03111721-xx] and 4A_BTM-
TEE_L1 (port C2) [03111719-xx]. They are routed as shown above.
► Route the Tube 2B_BTM-EXT_L
(port B2) [03111721‑xx],
TEE_L2-RET_L (port G2)
[03111723‑xx] and
PUSH-OUT_L (port G3)
[03111725‑xx]
through slot hole on Top panel
cover 3 [03106628‑xx].
2 Installation of Location 2 Upgrade Kit
2.3 Recommended Installation Steps
Assembly Instructions E by SIPLACE
Location 2 Upgrade Kit 04/2017
24
► Mount the side panel covers back in
place onto the machine frame.
► Install the Tape cutter mount assy [03106702-xx]. Depending on your machine type use the
indicated holes to mount the tape cutter side brackets as shown below. Pay attention that
there are different standoffs (see below).
Speed: