TK55253.FeederMaintenanceNotice.pdf - 第14页

Product Engineering Division SMT Sect ion Robotics Operations Y AMAHA MOTOR CO., L TD. MDOC-SOFT50282 14/ 21 Fig 4.2 [ U nit log]-[I D Log Setting] ※ When you us e m aintenan ce notice based on pi ckup error rate, it is …

100%1 / 21
Product Engineering Division
SMT Section
Robotics Operations
YAMAHA MOTOR CO., LTD.
MDOC-SOFT50282
13/21
4. Setting Method
4.1 Software Setting
To enable this function, open [Software Setting]-[History]-[Unit log]-[Log Setting]-
[Management of ID log] screen, and check [Maintenance Notice] check box. When this item
is unchecked, this function does not work.
Fig 4.1 [Software Setting]-[History]
Product Engineering Division
SMT Section
Robotics Operations
YAMAHA MOTOR CO., LTD.
MDOC-SOFT50282
14/21
Fig 4.2 [Unit log]-[ID Log Setting]
※ When you use maintenance notice based on pickup error rate, it is recommended to
set [Server Path]. By setting [Server Path], individual log file is saved for each
Feeder ID, and information is taken over at power OFF/ON and also shared among
other machines.
Product Engineering Division
SMT Section
Robotics Operations
YAMAHA MOTOR CO., LTD.
MDOC-SOFT50282
15/21
4.2 Machine Setting
On [Machine]-[Specification Information]-[Maintenance Specification]-[Feeder], you can
change the timing to display the maintenance message.
Fig 4.3 The [Machine]-[Specification Setting]-[Maintenance Specification]-[Feeder] screen
Table 4.1 [Machine]-[Specification Information]-[Maintenance Specification]-[Feeder]
Item Function
Notice timing Timing to display the maintenance notice message or stop
error.
You can take multiple selections. For details of each item,
refer to Table 4.2.
When no item is selected, the message is not displayed.
By default, only “Feeder ON/OFF” is selected.