00198171-02_Technical_Training_FSE_TX-Series_EN.pdf - 第77页
6 Conveyor System 6.5 Parts Exchange / Settings / Calibration Technical Training FSE SIPLACE TX-Series 01/2018 77 6.5.2.5 Teaching the sensor 1. Log on as Machine service (1-3). 2. Click on Check sensors icon (1). Select…
6 Conveyor System
6.5 Parts Exchange / Settings / Calibration
76 Technical Training FSE SIPLACE TX-Series 01/2018
6.5.2.4 Board reference corner
1. Log on as Machine service (1-3). 2. Click Calibration (1).
Click Automatic calibration (2).
3. Select Board reference corner (1).
Click Next (2).
4. Select Conveyor (1).
Click Start (2).
5. Click Accept to save data and close.
6 Conveyor System
6.5 Parts Exchange / Settings / Calibration
Technical Training FSE SIPLACE TX-Series 01/2018 77
6.5.2.5 Teaching the sensor
1. Log on as Machine service (1-3). 2. Click on Check sensors icon (1).
Select Specific functions (2).
3. Click Conveyor Input/output. 4. Click on Sensor.
5. Click on red box Teach board sensor. 6. Click Select enable.
Click OK.
6 Conveyor System
6.5 Parts Exchange / Settings / Calibration
78 Technical Training FSE SIPLACE TX-Series 01/2018
6.5.2.6 Adjust Shuttle
1. Log on as Machine service (1-3). 2. Click on Calibration (1) menu.
Select Single calibration (2).
3. Click Input shuttle (1) or Outputshuttle
(2).
4. Click Calibrate conveyor lane width.
5. Click Increase or Decrease (1) to adjust
the conveyor to the value.
Click Calibration board sensor (2) for the
sensor in the shuttle.
6. Choose each transfer position 1-4. Use the
arrows (1).
Click Apply (2) to confirm.