SOM-1623-002.pdf - 第11页
Tg0594-PM-SO 6. Procedure for Black Light Replacement (1) Shut off the power to the machine and disconnect the connector for ring lighting and the nylon connector for black light. Fig. 7 (2) Loosen three setscrews fasten…
Tg0594-PM-SO
(3) Press the [Lighting Patt ID] button and then press the [PEC Light
#2] for adjustment setting.
Fig. 6
(4) After pressing the [ON] button for control switch operation, when
the [ENABLE] button on the operation panel is pressed within 2
seconds, the lighting for black light is turned on and the image
from the P.C.B. recognition camera appears.
When the [Lighting Patt ID] is set to [PEC Light #1], the standard
lighting is turned on and the image from the P.C.B. recognition
camera appears.
5. “Camera X/Y Origin” Tab
0402-002 8
Tg0594-PM-SO
6. Procedure for Black Light Replacement
(1) Shut off the power to the machine and disconnect the connector
for ring lighting and the nylon connector for black light.
Fig. 7
(2) Loosen three setscrews fastening the lighting unit and detach the
unit.
Fig. 8
6. Procedure for Black Light Replacement
0402-002 9
Setscrew (2 places)
Lighting Unit
Setscrew (Rear Side)
Connector for Ring Lighting
Nylon Connectors for Black Light
Tg0594-PM-SO
(3) Remove one of the two screws of the metal fixture fastening the
black light and loosen the other one such that the metal fixture
can be moved.
Fig. 9
(4) Shift the metal fixture for black light.
Fig. 10
6. Procedure for Black Light Replacement
0402-002 10
Screw
Metal Fixture for Black Light
Black Light Fluorescent LampBlack Light
Metal Fixture for
Black Light