SOM-1623-002.pdf - 第9页
Tg0594-PM-SO 5. “Camera X/Y Origin” T ab Using this tab, the P .C.B. recognition camera position adjustment and focus adjustment are performed. This tab sheet is for service personnel. (1) When the [Camera X/Y Origin] ta…
Tg0594-PM-SO
4. Settings for P.C.B. Recognition Test
(1) When the [P.E.C. Recog Test] tab is pressed at the “DVC. TEST”
sub menu window, the following tab sheet appears.
Fig. 3
(2) When the [Lighting Mode] button is pressed, the following display
appears.
Fig. 4
(3) When the [PEC Light #2] button is pressed, the color of the
button is turned to be yellow and the lighting for black light is
selected.
(4) When the [Return] button is pressed, the [P.E.C. Recog Test] tab
sheet is returned.
4. Settings for P.C.B. Recognition Test
0402-002 6
Tg0594-PM-SO
5. “Camera X/Y Origin” Tab
Using this tab, the P.C.B. recognition camera position adjustment and
focus adjustment are performed.
This tab sheet is for service personnel.
(1) When the [Camera X/Y Origin] tab is pressed at the “UNIT ADJ.”
sub menu window, the following tab sheet appears.
Fig. 5
(2) Press the [Camera ID] button and then press the [P.E.C. Recog]
button for adjustment setting.
5. “Camera X/Y Origin” Tab
0402-002 7
Note
Tg0594-PM-SO
(3) Press the [Lighting Patt ID] button and then press the [PEC Light
#2] for adjustment setting.
Fig. 6
(4) After pressing the [ON] button for control switch operation, when
the [ENABLE] button on the operation panel is pressed within 2
seconds, the lighting for black light is turned on and the image
from the P.C.B. recognition camera appears.
When the [Lighting Patt ID] is set to [PEC Light #1], the standard
lighting is turned on and the image from the P.C.B. recognition
camera appears.
5. “Camera X/Y Origin” Tab
0402-002 8