FUJI CP6 Bulk F3.0 Feeder手册.pdf.pdf - 第27页

CP-6 Bulk Feeder Handling Version 1.0 May 1, 1999 Version 2.0 September 29, 1999 Version 3.0 October 25, 1999 FUJI Machine Manufacturing Co., Ltd. SMT Equipment 19 Chausuyama, Yamamachi, Chiryu, Aichi Prefecture, 472-868…

100%1 / 27
Replacing the Hopper String
The shutter in the hopper is operated by means of a nylon string. If the string breaks or comes loose, it
should be repaired or replaced as shown below.
Procedure
1. Insert one end of the string into the slit in the shutter.
2. Pass the other end of the string upward through the slit in the plate and around
the retainer bolt, then back down through the slit in the plate. Insert this end of the
string into the slit in the shutter.
3. Move the slider forward as far as it will go, then adjust the string so there is a gap
of about 1 mm between the upper edge of the shutter and the upper limit of the
slit in the divider. Tighten the retainer screw to secure the string in this position.
4. Make sure the shutter moves smoothly up and down along the slit in the divider.
Slider
Retainer
String
Divider
Plate
Shutter
BF019
Replacing the Hopper String
Version 3.0 13 CP-6 Bulk Feeder Instruction
Notes:
Replacing the Hopper String
Version 3.0 14 CP-6 Bulk Feeder Instruction
CP-6 Bulk Feeder Handling
Version 1.0 May 1, 1999
Version 2.0 September 29, 1999
Version 3.0 October 25, 1999
FUJI Machine Manufacturing Co., Ltd.
SMT Equipment
19 Chausuyama, Yamamachi, Chiryu,
Aichi Prefecture, 472-8686 Japan
Copyright 1999 by Fuji Machine Manufacturing Co., Ltd.
Printed in Japan
The FUJI Internet
Fuji Internet aims at providing information to our customers in
the most efficient manner. This site makes a range of services
available, from manual updates and FAQs, to online technical
reports. Fuji hopes that this site will be used as a source of
information in addition to the services provided by your agent.
Fuji’s website is located at http://www.fuji.co.jp/
Fuji Internet membership is required to access the Technical
Information section of the site, contact your agent for details.
Any comments or opinions regarding this manual can be sent to
intnetqst@fuji.co.jp