cp842_eng_spec.pdf.pdf - 第5页

Prelim inar y CP-842E/ 842 ME S p ecif icati ons - 3 - Notes: 1. Power So urce: The built- in tra nsformer has pr imary s ide taps of 200, 210, 22 0, 230, 380, 400, 41 5, 460 and 480 Volts . A ded icated pow er sour ce, …

100%1 / 24
Preliminary CP-842E/842ME Specifications- 2 -
2. Machine Data and Operating Environment
2.1 Machine Data and Operating Environment
Specifications
Items
CP-842E CP-842ME
Power Requirement
*1
200 V AC (± 10 %), three-phase, 50/60 Hz
Power Consumption 9.5 kVA 9.0 kVA
Air Requirement 0.49 MPa, 46 L/min. (A.N.R.)
Weight (body) (5,950 kg) (4,880 kg)
Display Panels
Color LCD touch panel
Language: Japanese or English
Machine Color Ivory with reddish brown detailing
Installation Environment
*2
Temperature: 15°C to 35°C
Humidity: 30 % to 80 %
Altitude: 1,000 m or lower
Protective Features
*3
Class IP22 or equivalent
Preliminary CP-842E/842ME Specifications- 3 -
Notes:
1. Power Source: The built-in transformer has primary side taps of 200, 210, 220, 230,
380, 400, 415, 460 and 480 Volts. A dedicated power source, not shared with other
large equipment, should be used to avoid problems with electrical noise, voltage
fluctuations, and high frequency distortions.
2. No condensation
3. IP22: IEC protection against intrusion by body parts, and water.
Preliminary CP-842E/842ME Specifications- 4 -
3. Machine Specifications
3.1 Performance Specifications
Specifications
Item
CP-842E CP-842ME
Part size 0603 (0201) (0402 (01005)) to 19 × 19 mmParts
*1
Part height Up to 6 mm
Tape size
8, 12, 16, 24, 32 mm
(7”, 13”, 15”)
Packaging
*2
Bulk case 1005C (0402C), 1608C (0603C)
Capacity 70 × 2 40 × 2
100 % Cam speed 0.068 sec./part
X, Y axis 14.2 mm (including compensation
Z-axis 1.09 mm
D-axis None
θ-axis No limit
NC-axis Within one pitch
Placing rate
*3
Max.
movement
NY-axis 0.8 mm
Placing accuracy
*4
Rectangular chips, etc.
Currently undergoing testing
Placing reliability 99.99 % (including automatic recovery)
Fiducial mark reading time
*5
Approximately 0.25 sec./mark
Warranty period
*6
Warranty period for the equipment is 6,000 working
hours or 2 years (whichever elapses first).
Warranty period for the control software is 2,000
working hours or 1 year (whichever elapses first).
Warranty period for the feeders is 1 year.
Notes:
1. Support for placing 0402 (01005) parts is optional.
2. JIS, EIAJ compliant tape parts and EIA tape parts that are the same as EIAJ standard
parts.
3. The placing rate is reduced to 0.098 sec./part for one pitch movement of the D-axis, to
0.08 sec./part for two pitch movement of the NC-axis, and to 0.09 sec./part for three
pitch movement of the NC-axis.
4. The placing accuracy is obtained using fiducial mark referencing, based on tests
conducted by Fuji. Parts rotational offset is not considered. The above mentioned