00197717-02_VB_Traceability4.1_DE_EN.pdf - 第30页

System Requirements and Software Components Configuration 30 SIPLACE Traceability 4.1

System Requirements and Software Components

System Requirements for SIPLACE Traceability

SIPLACE Traceability 4.1 29

4 System Requirements and Software Components

System Requirements and Software Components

4.1

4.1 System Requirements for SIPLACE Traceability

System Requirements for SIPLACE Traceability

4.2

4.2 Configuration

Configuration

In order to establish the connection to the station computer, you need to install SIPLACE Trace Server

in the SIPLACE LAN. The installation options vary according to your network configuration and are as

follows:

1. SIPLACE Trace Service on one computer

This option requires that all SIPLACE Pro computers are available in the same LAN segment.

2. SIPLACE Trace Service on each line server

This option needs to be selected if the SIPLACE Pro computers are in different line-specific LAN seg-

ments.

3. SIPLACE Trace Monitor

SIPLACE Trace Monitor is installed as part of SIPLACE Studio and opened as a module via SIPLACE

Studio.

The following requirements need to be fulfilled:

1. Each Trace Service configured at the factory with the export option Database must be able to access

the central SQL server, on which the traceability database is installed.

2. The SQL server with the database is on computers in the same LAN segment.

NOTICE

System requirements

The system requirements (supported operating system and database variants) and an over-

view of mutually compatible products can be found in the Assembly Instructions SIPLACE Sup-

port Media, item no [00197214-xx].

NOTICE

Station based traceability

For machine-based traceability, the SIPLACE placement machines must be equipped with the

options "Setup verification" and "Traceability".

NOTICE

System requirements

The system requirements (supported operating system and database variants) and an over-

view of mutually compatible products can be found in the Assembly Instructions SIPLACE Sup-

port Media, item no [00197214-xx].

NOTICE

SQL server

For a detailed description of how to install the SQL servers, refer to the Assembly Instructions

(item no. 00196824-xx (English)), on Support Media DVD 1. The SQL server itself is not part of

the Support Media DVDs.

System Requirements and Software Components

Configuration

30 SIPLACE Traceability 4.1

Existing Restrictions

Traceability

SIPLACE Traceability 4.1 31

5 Existing Restrictions

Existing Restrictions

5.1

5.1 Traceability

Traceability

▪ The Traceability OIB interface "OIB Interlocking Interface", has been discontinued and will no longer

be available in future versions. This interface will be replaced with the new "OIB Eventing Interface".

▪ Traceability 4.x does not support archiving. We recommend that you periodically create a new data-

base and manually archive older versions of Trace database. The Trace Service Manager has a

range of database operations for backing up a non-productive (to be archived) database in the file

system and to then delete this on the SQL server.

▪ Nonobservance of the restrictions specified in the SIPLACE Setup Center 7.x software version de-

scription can lead to incorrect traceability data.

▪ The following features of SIPLACE Setup Center 7.x are supported in station based traceability

mode only:

– Alternative components

– Random setup on feeder tables

▪ The component level indicator in connection with setup verification should always be run with acti-

vated stop thresholds.

▪ When downloading a new setup in line-based traceability, the conveyors must be empty. If this is not

the case, the traceability data may be incorrect.

▪ When using dual conveyors, the conveyor lane is unknown if the following requirements are present:

– The line has been configured for station-based traceability

– The traceability information is generated on stations with station software 40x/50x or 60x.

– The job in the LCGUI uses the same setup, recipe or board on the two lanes.

▪ Line-based traceability does not support station-wise downloads.

▪ Station software version 408 is not supported.

▪ If a track is not fitted with splice detection, the reliability of the traceability data depends on the ac-

curacy of the component levels. The packaging unit change is therefore logged according to the re-

spective component level.

▪ The logging of detected splice points for X feeders (so-called "Splice Events") in the traceability XML

files is no longer performed since SIPLACE Trace Service 3.3 in the default configuration. For further

information about this, contact your local SIPLACE customer support.

▪ The renaming or moving of lines within the programming system "Siplace Pro Desktop" during pro-

duction operations is not supported. To avoid data loss and/or faulty data, the following procedures

should be followed for renaming or moving the Siplace Pro line name:

– All conveyor lanes in the line must be run empty

– After this, rename the line on the SIPLACE Pro desktop

– Configure the new line name in Setup Center (delete old line, add new one)

– Configure the new line name in Trace Service (delete old line,

add new one, apply configuration)

– The production job to be produced needs to be reconfigured at the line, using the SIPLACE Pro

LineControl function.

▪ Traceability data of bulk case feeders, linear feeders and LED feeders can only be used if the oper-

ator makes sure that the feeder is completely empty before each refill.

▪ The following maximum lengths (characters) for the PCB barcode are available if the PCB barcode

is read in the SIPLACE machine:

Station software Single conveyor Synchronous dual convey-

Asynchronous dual convey-

407 / 505 / 605 / 70x 40 characters 40 characters / 40 charac-

ters

40 characters

From SiplacePro 11.2

and 707.1

255 characters 255 characters / 255 char-

acters

255 characters