TX_V2_年保养英文.pdf - 第22页
www.asm-smt.com
3 WF 4 TX-Series V2 Maintenance Empty and clean the reject bin 0.5 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T2
Wear Part: Consumables:
C3
www.asm-smt.com
1 Remove the reject bin. 2 Empty the reject bin into a waste box. 3 Clean the reject bin.
4 Return the reject bin. 5 Repeat steps 1 to 4 for the other locations.
www.asm-smt.com
4 WF 4 TX-Series V2 Maintenance Remove the TH to be maintained 6 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T7, T8, T9, T31, T87
Wear Part: Consumables:
www.asm-smt.com
1 Move the gantry with the head to be main-
tained to a good working position.
2 Remove the two screws fastening the
camera visual shield.
3 Unplug the three compressed air connec-
tions from the left TH segment.
4 Unplug the two ribbon cables from the TH
segment.
5 Remove the three screws fixing the TH
segment (1) to (3).
6 Hold the TH segment and remove the last
screw before taking it off.