TX_V2_年保养英文.pdf - 第26页
5 WF 4 TX-Series V2 Maintenance Return a maintained TH 6 min 2 / 2 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c o m m e n c i n g M a i n t e n a n c e Machine…
5 WF 4 TX-Series V2 Maintenance Return a maintained TH 6 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T7, T8, T9, T87
Wear Part: Consumables:
www.asm-smt.com
1 Take the first TH segment out of the trans-
port box.
2 Put the TH segment to the head mounting
plate and fix it slightly with one screw.
3 Insert the other three screws (1) to (3) and
fix them slightly.
4 Fasten all screws (1) to (4) with a torque
of 2.7 Nm.
5 Connect the two ribbon cables. 6 Connect the three compressed air connec-
tions.
5 WF 4 TX-Series V2 Maintenance Return a maintained TH 6 min 2 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T7, T8, T9, T87
Wear Part: Consumables:
www.asm-smt.com
7 Repeat steps 1 to 6 for the second TH
segment.
8 Mount the camera visual shield with the
two screws.
6 WF 4 TX-Series V2 Maintenance Clean the Z-Axis of the remaining C&P20x heads 1 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T3, T20
Wear Part: Consumables:
www.asm-smt.com
1 Move all gantries to the end limit for the
heads remaining in the machine.
2 Area of the head to be cleaned. 3 Remove any components from the Z-Axis.
4 If OK → next task. 5 Repeat steps 1 to 4 for the remaining
heads.