TX_V2_年保养英文.pdf - 第28页
www.asm-smt.com
6 WF 4 TX-Series V2 Maintenance Clean the Z-Axis of the remaining C&P20x heads 1 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T3, T20
Wear Part: Consumables:
www.asm-smt.com
1 Move all gantries to the end limit for the
heads remaining in the machine.
2 Area of the head to be cleaned. 3 Remove any components from the Z-Axis.
4 If OK → next task. 5 Repeat steps 1 to 4 for the remaining
heads.
www.asm-smt.com
7 WF 4 TX-Series V2 Maintenance Grease the guide bearing, clean the linear guide and scale of the Y-Axis 6 min 1 / 4
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T31, T89, T90
Wear Part: Consumables:
C3, C5, C31, C49
www.asm-smt.com
1 Pull back the plunger to the lock. 2 Unscrew the top section. 3 Prepare the grease cartridge (if required).
4 Insert the grease cartridge into the grease
gun (if required).
5 Close the grease gun. 6 Mount the hose with the hydraulic mouth-
piece Y-Axis.