TX_V2_年保养英文.pdf - 第36页
www.asm-smt.com
8 WF 4 TX-Series V2 Maintenance Grease the guide bearing, clean the linear guide and scale of the X-Axis 6 min 3 / 3
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T89, T90
Wear Part: Consumables:
C3, C5, C31, C49
www.asm-smt.com
13 Clean the X-Axis linear guide. 14 Clean the X-Axis scale. 15 Repeat steps 4 to 14 on the X-Axis of the
other gantry.
www.asm-smt.com
9 WF 4 TX-Series V2 Maintenance Check and clean the magnetic surfaces of X- and Y-Axis 1.5 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T3
Wear Part: Consumables:
C3
www.asm-smt.com
1 Move all gantries to the end limit location
1.
2 Check X-Axis magnets for contamination
and damage.
3 If you see any damage contact service.
4 If OK clean the X-Axis magnets. 5 Check Y-Axis magnets for contamination
and damage.
6 If you see any damage contact service.