TX_V2_年保养英文.pdf - 第62页
18 WF 4 TX-Series V2 Maintenance Calibrate the maintained TH 13 min 8 / 9 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c o m m e n c i n g M a i n t e n a n c e …
18 WF 4 TX-Series V2 Maintenance Calibrate the maintained TH 13 min 7 / 9
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T5
Wear Part: Consumables:
www.asm-smt.com
37 Select the second TH if required. 38 Repeat steps 30 to 36. 39 Click on "Calibration".
40 Click on "Start". 41 Press the start button if requested. 42 The calibration takes about 5 minutes.
18 WF 4 TX-Series V2 Maintenance Calibrate the maintained TH 13 min 8 / 9
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T5
Wear Part: Consumables:
www.asm-smt.com
43 Click on "Accept" (1) and then on "Display
setup" (2).
44 Click on "All nozzles". 45 Click on "Return to nozzle changer".
46 Select the second TH if required. 47 Repeat steps 45 and 46 if required. 48 Press the stop button.
18 WF 4 TX-Series V2 Maintenance Calibrate the maintained TH 13 min 9 / 9
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T5
Wear Part: Consumables:
www.asm-smt.com
49 Open the cover. 50 Remove the calibration tool. 51 Close the cover.