S-Product_Flyer.pdf - 第11页

11 TOOLS CLEANING - Condensation filters, machinery parts, bulk goods A ll systems are serially pre-equipped by default with a ClosedLoop re-treatment processing, provided for both the cleaning as well as the rinsing flu…

TOOLS CLEANING - Stencils, carriers, machinery parts, filters

PSE M series: Perfect for maintenance cleaning

Systems of the PSE M series are fully equipped in their basic

version and clean stencils (MV8), carriers, masks, pallets,

ESD boxes, magazines, machinery parts, lathe parts and milled

parts (MH5, MH7).

The main features of PSE MH systems

• Two tank solder carrier cleaning system with three circuits

• 101 freely selectable process programs

• Fully automatic 3 - 4step process

• Process and service intervals PLC controlled

• Event issuing and software control via touch screen

• Cleaning up to 55 °C (standard), up to 80 °C (HT-version)

• ClosedLoop processing of cleaning and rinsing fluid

• Exchange for rinse water and pump out unit as standard

• Traceability (Basic)

The main features of PSE MV8 TWIN

• Two tank combi system with two separate circuits

• TWIN-Slot for two stencils

• Short cycle time (ca. 7 min) depending on contamination

• ClosedLoop processing of cleaning and rinsing fluid

• Three-stage double fine filter system 10μm

• Process and service intervals PLC controlled

• Event issuing and software control via touch screen

• Waterfree process possible with applicable cleaning and

rinsing detergent

• Traceability (Basic)

The PSE MH systems offer economy all-round systems for

nearly all requirements of maintenance cleaning from flux, oil,

dust and grease for carriers / masks ESD boxes, PCB magazi-

nes, pallets, machine parts and other small parts (for example,

turning and milling parts).

The PSE MV8 TWIN is a robust PowerSpray

system for the

cleaning of two stencils / misprint frames up to 900 x 800 mm

(35“ x 32“) in one cleaning cycle which provides excellent

cleaning results in a short cycle time (about 7 - 10 minutes).

ClosedLoopPowerSpray

PSE MH5

Capacity: 7 solder carriers up to 560 x 490 mm or up to 2

baskets, VMH

hot air evaporative drying

Process chamber: 540 (W), 590 (D), 570 (H)mm

PSE MH7

Capacity: 11 solder carriers up to 700 x 620 mm or up to 3

baskets, VMH

hot air evaporative drying

Process chamber: 700 (W), 720 (D), 710 (H) mm

PSE MV8 TWIN

2 stencils / misprint frames up to 900 x 800 mm (35“ x 32“),

4 vertical spray rotors, CWA

compression drying

Process chamber: 550 (W), 875 (D), 1000 (H) mm

Screens / stencils

Misprints

Solder carriers

Machinery parts

PSE MV8 TWINPSE MH7

kolb systems: solid - flexible - safe - smart Further information: www.kolb-ct.com

NOTES

TOOLS CLEANING - Condensation filters, machinery parts, bulk goods

All systems are serially pre-equipped by default with a

ClosedLoop re-treatment processing, provided for both the

cleaning as well as the rinsing fluid.

The model AF30P is specifically designed for industrial part-

cleaning.

The main features of AF20, AF30, AF75

• 200 l (AF20), 300 l (AF30), 750 l (AF75) process chambers

• Short cycle times

• Additional ultrasonic unit (AF30 P)

• Available with washing drum for bulk goods (AF30 P)

• AF75 with external 2 x 1000 l tank system

• One-push button handling - fully automatic

• PLC process control via touch screen

• Short cycle times, high cleaning efficiency

• Load and unload into empty process chamber

• Fully automatic process: cleaning - rinsing - drying

• ClosedLoop recycling of cleaning and rinsing fluid

• Cleaning and rinsing circulation with skimmer fine filtering

• Rinsing circulation with automatic water exchange

• Filter pressure PLC controlled

• Maintenance and operation events PLC controlled

• Available with automatic re-dosage unit

• Stainless steel tubeframe base rack with rugged casing

made of stainless steel

• Simple and quick maintenance

In the fully automatic kolb AF20, AF30 and AF75 systems

the goods are cleaned, rinsed and dried in one single process

chamber, which is empty during the loading and is pressure

flooded with fine filtered cleaning fluid from a separate tank

through a PLC controlled process. After the goods are cleaned

with the pressure flooding AirFlow

technology, the likewise

filtered rinsing water, is pumped into the process chamber from

a separate tank. Drying is operated by a powerful HotSpeed

warm air dryer unit. All systems have a permanent skimmer

filtration for the cleaning and the rinsing circuit. The model AF30

/AF30P is pre-equipped for WPSDIU (see page 12) waste water

treatment

The process chamber of the systems can be used variably for

different requirements:

• Direct turbulence air-in-immersion cleaning in the entire pro-

cess chamber is an ideal process for the cleaning of conden-

sate filters or machine parts.

• Dip cleaning in up to five in the process chamber rotating

wire mesh baskets or in a washing drum (AF30 P) is the

perfect method to wash lathe parts, milled parts or die cast

components.

• AF75 systems which are perfectly suitable for bulk cleaning of

condensation filters also allow the cleaning of external

cyclones, containers

and oven tubings.

AF series: Compressed air in immersion systems

ClosedLoopPowerSpray

Condensate filters

Seho filter

Washing drum

Rotation basket

kolb systems: solid - flexible - safe - smart Further information: www.kolb-ct.com

AF75AF30

NOTES

Whether through government regulations or taxes, or whether

through privatization and thereby commercialization the (dwind-

ling) global freshwater resources will become a more and more

valuable asset. For economical and ecological reasons it is

foreseeable that the cost of fresh water will significantly influence

the value added chain in any production where the dwindling

resource is a needed in higher amounts.

An internal rinsing water (ClosedLoop) processing cycle is inte-

grated as a standard in all kolb PowerSpray

cleaning systems

with two or more separate circuits already. Here, the rinse water

is reprocessed several times before it needs to be replaced.

Then it may be recycled for reuse in special (CrossLoop) water

management modules or processed for the discharge into the

local sewage network, which is only allowed if the contamination

is safely below legal limits.

For both technologies kolb offers innovative, cost efficient and

compact SYMBIO-modules (integrated as a framework module

at the system back) which deliver perfect results.

SYMBIO-modules increase the depth of a cleaning system by

only about 400 - 700 millimeters.

WATER MANAGEMENT - Recycling and disposal

WPCL & WPSD modules: Reducing cost, conserving resources

kolb systems: solid - flexible - safe - smart Further information: www.kolb-ct.com

AQUBE

LH7 with SYMBIO module

SYMBIOmodules

increase

the

cleanin

only about 4

- 7

millimeters.

UBE

LH7 with SYMBIO m

WPSD IU WPSD IUAF30

WPCL IUT3

The WPSD IU SYMBIO modu-

les use the patented kolb

HME

process for metal pre-

cipitation from alkaline rinsing

waters with high dissolved and /

or undissolved heavy metal

contents such as lead, tin, silver

and copper. The rinse water is

thus treated in such a way that

it can be indirectly disposed into

a public sewage network.

WPCL IUT3

SYMBIO-module for the recycling of heavy metal contami-

nated DI / DM rinse water with CrossLoop technology for all

AQUBE

X systems.

WPCL IU

SYMBIO-module for all AQUBE

systems (except MV8

sTWIN) for the treatment of heavy metal contaminated rin-

sing water to be indirectly discharged (subject to regulatory

approval) into a public sewage network.

WPSD IUAF30

SYMBIO-module for AF30 AirFlow

systems for the

treatment of heavy metal contaminated rinsing water to be

indirectly discharged (subject to regulatory approval) into a

public sewage network.