Covers.pdf - 第14页

COVERS MACHINE COVERS 3.14 Technical Reference Manu al Chapter Issue 2 Sep 09 and rear corner p anels respectively . 8. Pull the top edge of th e cover out to release the locating t abs from the top edge. Quarter-T urn R…

COVERS

MACHINE COVERS

Chapter Issue 2 Sep 09 Technical Reference Manual 3.13

When refitting, the contact body is aligned with the bezel.

6. Release the quarter-turn ring latch fastener, located internally at the top front

of the cover.

7. Release the front and rear quarter-turn ring latches located above the front

Switch Contact Block Removed

COVERS

MACHINE COVERS

3.14 Technical Reference Manual Chapter Issue 2 Sep 09

and rear corner panels respectively.

8. Pull the top edge of the cover out to release the locating tabs from the top

edge.

Quarter-Turn Ring Fastener

Panel Locating Tabs

COVERS

MACHINE COVERS

Chapter Issue 2 Sep 09 Technical Reference Manual 3.15

The panel can be ’hinged’ away to release the bottom tabs from the support

rail. Lift the panel out of position.

NOTE

When refitting the right hand panel, ensure that the cables from the MMI are

routed in the support arm groove.

Cable Routing