ePM 中文操作說明.pdf - 第17页

Programmer ’ s Manual | 17 2. 圖Figure 2-9 是安裝HASP 元件驅動程式的步驟. 擊點 “ Next＂按鈕. Figure 2-9. HASP SRM Run-ti me Setup – Installation 3. HASP SRM Run-time 設定檔安裝如圖 Figure 2-10 依據您選擇安裝 Figure 2-10. HAS P SRM Run-time Setup – Pro…

16 | Chapter 2. ePM-SPI

3DSolderPasteInspectionSystem

Version 1.0

KOH YOUNG TECHNOLOGY. INC.

Figure 2-7. Java SE Runtime Environment – Progress

2.3. 步驟3. HASP SRM Run-time Setup

1. 圖“Figure 2-8＂是安裝HASP SRM Run-time 軟體設定. 擊點 “Next＂按鈕.

Figure 2-8. HASP SRM Run-time Setup

Programmer’s Manual | 17

2. 圖Figure 2-9 是安裝HASP 元件驅動程式的步驟. 擊點 “Next＂按鈕.

Figure 2-9. HASP SRM Run-time Setup – Installation

3. HASP SRM Run-time 設定檔安裝如圖 Figure 2-10 依據您選擇安裝

Figure 2-10. HASP SRM Run-time Setup – Progressing Installation

18 | Chapter 2. ePM-SPI

3DSolderPasteInspectionSystem

Version 1.0

KOH YOUNG TECHNOLOGY. INC.

4. HASP SRM Run-time 設定檔安裝成功. 擊點 “Finish＂按鈕.

Figure 2-11. HASP SRM Run-time Setup – Finishing Installation

注意: 此時所有

ePM-SPI

安裝步驟已經完成.

若有使用中發生任何錯誤訊息, 請參閱以下表格, 對照解決方案.

Table 2-1. 驗證錯誤的解決方案

錯誤訊息訊息顯示解決方案

1 Serial Number

Error

Not available license.

Please contact Namkang Hi-Tech.

ERROR CODE: 4

Not available serial number

ERROR CODE: 6

確認序號與輸入是否相同.

2 License Feature

Number Error

No license

ERROR CODE: 2

Error 31: Feature not found

將驗證碼寄送至廠商確認.

將原版程式交由廠商確認驗證碼

廠商收到資料後重新產生驗證碼.

使用者收到新驗證碼後更新.

3 No Hard lack

key

Error 7: HASP HL Key not found 確認硬體鎖.

4 Break down

hard lock

Error 7: HASP HL Key not found 更換硬體鎖.