00198765-02_VD_SSW_713.1_R20-1_EN_DE.pdf - 第24页

Station Software 713.1 (R 20-1) / V ersion Description 05/2020 Edition 24 5.11 Changes With HE RMES-IPC-9852 V ersion 1.2 Compatible mode: Complete The station software fu lly complies with HE RMES-I PC-9852 V1.2. In ord…

Station Software 713.1 (R20-1) / Version Description 05/2020 Edition

5.7 Placement Improvements – Freely Programmable Custom Reject

Bins

Compatible mode: Complete

Additional to the already existing standard SIPLACE reject bins, it is possible to program custom

reject bins. These custom reject bins can be used to e.g. dispose of “dipped” or “glued”

components separately from other disposed components. For further information, please refer to

the Feature Guide Freely Programmable Reject Bin, item no. [00198771-xx].

The custom reject bins can be configured via an individual XML file. It is also possible to disable

standard reject bins using this XML file.

WARNING

Risk of crashing

If the custom reject bin is not installed correctly and the highest edge of the customer

reject bin exceeds the z-height of the conveyor edge, a crash might occur.

► Make sure the custom reject bin is correctly installed!

It is not possible to use a safety circuit to check whether the custom reject bin is fit

correctly into the machine.

5.8 Placement Improvements – Automatic Pin1 Recognition

Compatible mode: Complete

To save time during placement, it is possible to limit the check period and check frequency per

component for the orientation check during position check.

For this, the Check pickup orientation on component change option in the Object Properties of

the Component Editor in SIPLACE Pro has been extended. If this option is activated, the check

mode can be set to either Manually by user or to Automatic. If the Automatic mode is selected,

three further options can be specified: the number of measurements, the checking period, and the

check sequence.

For further information, please refer to the Feature Guide Automatic Pin1 Recognition, item no.

[00198770-xx].

5.9 Reject Rate View - Enhancements

Compatible mode: Complete

The reject rate view per location has been extended by an additional widget which displays the

number and kind of errors on a daily or hourly basis. The reject rate view can be accessed via

Messages - Statistics.

5.10 Changes for Stop Thresholds for Reject Rate Monitoring

Compatible mode: Complete

The “track empty” errors are no longer resettable on the station GUI. Instead, an error message is

displayed which can only be cleared by Machine Service, i.e. the pickup settings checked option

on the error to clear the message is deactivated for Operator and Advanced production.

Station Software 713.1 (R20-1) / Version Description 05/2020 Edition

5.11 Changes With HERMES-IPC-9852 Version 1.2

Compatible mode: Complete

The station software fully complies with HERMES-IPC-9852 V1.2. In order to visualize the Vertical

Channel messages, the Vertical channel tab has been added to the IPC-HERMES-9852 events

under Messages. In this tab, the traffic on the HVC (Hermes Vertical Channel) with all running

sessions and the corresponding client systems can be viewed.

5.12 New Fiducial Type “Edge” Supported

Compatible mode: Complete

The new fiducial type “Edge” is supported. With this new fiducial type, it is possible to define the

run of an edge, which is useful for LED alignments. The fiducial is visualized as a hatched line, as

shown in the following icon:

5.13 Inspecting Components After Placement at Too High Speed

Compatible mode: Complete

If the PCB description is incorrect or if there are bends in the PCB, the nominal position of the PCB

top edge might deviate distinctly. The component might therefore be placed at too high speed, and

consequently, get damaged.

If such an event occurs, the respective placement position is set to “inspect” and the error

40084 Component on board is possibly damaged is displayed. The error provides images from

the PCB camera of the component at the placement position and at the nozzle which can be used

to inspect the component for damages. The error can be solved with one of the following options:

– Component is not damaged: continue producing

– Component is damaged: skip panel

– Component is damaged: cancel board

Station Software 713.1 (R20-1) / Version Description 05/2020 Edition

6 Hardware Specifications

6.1 Supported Feeder Types

The following feeders are supported by the 713.1 station software version:

Feeder Modules from ASM Assembly Systems

– 4 mm – 104 mm X-feeder

– 8 mm - 88 mm E (E-series only)

– 2x8 mm X-feeder

– 16 mm XN-feeder

– Surftape AX (8 mm, 12 mm, 16 mm)

– LED feeder TE

LED feeder HS

– SIPLACE Glue Feeder

– SIPLACE JTF-S (X-series S and SX1/SX2 V2 only)

– SIPLACE JTF-M (X-series S, X4i S micron and SX1/SX2 V2 only)

– SIPLACE JTF-ML (TX-series only)

– SIPLACE JTF-ML2 (TX-series only)

– JTF-MW E (E-series only)

– Arbitrary Carrier X

– Conveyor Carrier X

– Carrier X (XTH) (X2, X3, X4 on location 2 and 4 only)

– Carrier SX (SX1/SX2 with Twin Head and CPP head only)

– Stick feeder with X-adapter

– Stick feeder E

– MTC2 (X2, X3, X4 on location 2 and 4, X2 S, X3 S, X4 S on location 2)

– WPC5/WPC6 (SX1/SX2, X-series S on location 2)

– SIPLACE Wafer Systems (CA-series only)

– Smart feeder X

Smart feeder Xi