00198765-02_VD_SSW_713.1_R20-1_EN_DE.pdf - 第29页
Station Software 713.1 (R 20-1) / V ersion Description 05/2020 Edition 29 9 Corrected Errors 71 3.1 Station S oftware The 713.1 station soft ware version contains all error corrections of the previous 7xx v ersions.
Station Software 713.1 (R20-1) / Version Description 05/2020 Edition
28
8 Restrictions
For details concerning possible machine configurations, please consult the latest version of the
machine specification.
Restrictions to features in previous versions can be found in the Station Software V7xx Feature
Description, item no. [00197741-xx].
Station Software 713.1 (R20-1) / Version Description 05/2020 Edition
29
9 Corrected Errors
713.1 Station Software
The 713.1 station software version contains all error corrections of the previous 7xx versions.
Station Software 713.1 (R20-1) / Version Description 05/2020 Edition
30
10 Important Terms and Abbreviations
CA4
CA4 V2
Machine type of the Chip Assembly (CA)-series with 4 gantries
and 2 PAs
C&P
Collect & Place
CPP
Collect & Place & Pick & Place
DC
Dual Conveyor
DX1/DX2
Machine type with 1 or 2 gantries and 1 PA
DX4
Machine type with 4 gantries and 2 PAs
E1 L
E1 R
Machine type with 1 gantry and 1 PA
EDIF
Electronic Design Interchange Format
eWLP
embedded Wafer Level Process
FOPLP
Fan-Out Panel Level Packaging
FCCS
Field Camera Calibration System
GUI
Graphical User Interface
HFH
High Force Head
HW
Hardware
MGCU
Modular Gantry Control Unit
MHCU
Modular Head Control Unit
MTC
Matrix Tray Changer
OIS
Operator Information System
PA
Processing area
PCB
Printed circuit board
Placement mode:
2-in-1
When a machine runs in I-Placement mode, it is possible to
perform manual operations for one side / gantry. This placement
mode is also called "independent".
Placement mode:
Alternating
Placement mode in a dual gantry placement area, in which both
gantries place components on both boards in a dual conveyor.
First, both gantries place all assigned components on the board
in lane one and then on the board in lane two.
Placement mode:
Borrow
Performance
A line runs in I-Placement mode and to get a balanced
throughput between the left and right conveyor lanes, e.g. the
last machine runs in Alternating mode and places components in
this placement area on the board of the other lane.
Placement mode:
I-Placement
Placement mode in a dual gantry placement area in which each
gantry only places components on the board of the assigned
conveyor lane.
SC
Single Conveyor
SC
SIPLACE Setup Center (external setup control system)
SW
Software
SWS
SIPLACE Wafer System