00196376-0102_UM S-Feeder_EN.pdf - 第23页
General Operational Safety Safety Instructions User Manual SIPLACE S-Feeder 23 1.5.5 Operational Safety ▪ NEVER open any of the protectiv e covers if you are not totally familiar with the use and functioning of the machi…
General
Safety Instructions Incorrect Usage
22 User Manual SIPLACE S-Feeder
1.5.4 Incorrect Usage
Failure to use the product as prescribed can result in both danger to life and limb and material damage.
For this reason any use that is not prescribed is not allowed. If the product is not used as prescribed,
ASM Assembly Systems accepts no liability for any damage that may occur and does not guarantee that
the components will work properly and without problems.
Failure to use the product as prescribed includes, for example:
▪ Placement of components that do not meet the permitted specification.
▪ The use on other machines than those machine types officially approved by ASM Assembly Systems
for this product.
▪ The use of the product in a working environment which deviates from that described in this manual.
▪ Use of the placement machine by unqualified personnel.
General
Operational Safety Safety Instructions
User Manual SIPLACE S-Feeder 23
1.5.5 Operational Safety
▪ NEVER open any of the protective covers if you are not totally familiar with the use and functioning
of the machine! The protective covers may only be opened during operation if you are expressly
requested to do so in this Operating Manual or by a dialog in the station software!
▪ The key-operated switch may only be unlocked by qualified and specially trained personnel!
It may only be unlocked during operation if you are expressly requested to do so in this Operating
Manual or by a dialog in the station software!
▪ NEVER place your head or arms in the gantry traveling range while the station is switched on!
▪ Never remove feeders from the changeover table while the machine is in operation.
▪ Never make changes, however minor, unless you are totally aware of the effect they will have on the
overall functioning of the system.
▪ The stations must always be set up, retooled and maintained by appropriately trained personnel.
▪ Only use original spare parts and authorized accessories of ASM Assembly Systems. The use of
other parts will affect safety and can invalidate the liability for any consequential damage.
▪ The operational safety of SMD placement machines can only be guaranteed if the system is used
as prescribed and in accordance with the instructions in the Operating Manual.
▪ The machine key and the key for the key-operated switch must be kept safe so that they can only be
accessed by qualified personnel!
▪ If you need to work on the machine and you do not have adequately trained personnel at your com-
pany, always call in a service engineer from ASM Assembly Systems ! ASM Assembly Systems will
not accept liability for any damage or consequential damage that is the result of incorrect work.
▪ Machine operators may only carry out work for which they have been adequately trained and with
which they are totally familiar!
▪ Always follow any safety regulations specific to your country!
WARNING
Type and source of the danger
The following points MUST be observed in order to maintain operational safety:
DANGER
Type and source of the danger
This machine is electrically driven. When electrical devices are in use, certain parts carry
dangerous voltage levels!
Switch the placement machine off at the main switch and disconnect it from the power supply
before carrying out any work on live components.
There is a risk of fatal injuries, severe injuries and/or considerable damage to equipment if any
of these instructions are not followed!
WARNING
Type and source of the danger
In spite of all the safety precautions taken by the manufacturer, failure to use the system as
prescribed can result in severe physical injury (e.g. from the moving gantry) and/or
considerable damage to equipment!
For the machine to be safe, it must be used correctly by qualified personnel and all warnings
must be observed!
Some work on the machine (e.g. setting up) requires training that goes beyond the scope of this
Manual.
General
Safety Instructions Operational Safety
24 User Manual SIPLACE S-Feeder