00196376-0102_UM S-Feeder_EN.pdf - 第7页
General Further Information About this Manual User Manual SIPLACE S-Feeder 7 1 General 1.1 About this Manual This manual describes how to operate the S feeders in the SIPLA C E f a m i l y . T o o r d e r s p a r e p a r…
Table of Contents
6 User Manual SIPLACE S-Feeder
General
Further Information About this Manual
User Manual SIPLACE S-Feeder 7
1 General
1.1 About this Manual
This manual describes how to operate the S feeders in the SIPLACE family. To order spare parts, please
refer to the SIPLACE online spare parts catalogue.
1.1.1 Further Information
The following documents supplement this manual by providing a concise summary of key information
about the S feeders:
▪ Job Guide "
Feeders
This briefly describes how to operate the different S feeders.
▪ Job poster "
Splicing the tapes
"
This describes the individual steps for correctly splicing tapes.
General
Overview of SIPLACE S Feeders Tape Feeder Modules
8 User Manual SIPLACE S-Feeder
1.2 Overview of SIPLACE S Feeders
The following section provides an overview of the S feeders in the SIPLACE family and their areas of
use.
1.2.1 Tape Feeder Modules
The SIPLACE feeders have short cycle times and high precision positioning of components into the pick-
up positions. Productivity and small recipe sizes are easy to handle as the feeders can be quickly con-
verted to deal with other components and the step sizes adjusted accordingly.
3x8 mm S feeders
For processing components in 8 mm tapes on 3 separate tracks.
- 3x8 mm S
- 3x8 mm S for 0201/0402 CO
- 3x8 mm S for 01005 CO
- 3x8 mm SL (shutterless feeder)
12/16 mm S feeders
For processing components in 12 and 16 mm tapes.
24/32, 44, 56, 72 and 88 mm S feeders
For processing components in 24 mm to 88 mm tapes.
- 24/32 mm S
- 44 mm S
- 56 mm S
- 72 mm S
- 88 mm S
DP feeders (DP = Deep Pocket)
For processing high components up to 25 mm height in 24 mm to
56 mm tapes.
- 24/32 mm S DP
- 44 mm S DP
- 56 mm S DP