00196715-04_IM_SSW_704_03_SP1_DE_EN.pdf - 第12页
Station Software 704.03 SP1 / Installation Manual Ausgabe 10/2011 Edition Flowchart: Upgrading from 60x software versions Figure 3-1: Upgrading from 60x software versions 12
Station Software 704.03 SP1 / Installation Manual Ausgabe 10/2011 Edition
3.5 Upgrading from 60x software versions (X-series placement
machines)
By upgrading from 60x station software versions, a complete reinstallation/recalibration and mostly
also a hardware rebuilding will be necessary. For this, a corresponding upgrade package is
available, that can be installed by the SIPLACE Service if required.
– Ser.No. B001 – B325: cannot be upgraded to the 70x software.
– Ser.No. B326 – B599: can only be upgraded to the 70x software by a service team from
Munich.
– Ser.No. B600 – B751: Update of CAN node and upgrade of the C&P20 nozzle changer to the -
04 version required.
– As of Ser.No. B752 the software upgrade to the 70x software can be performed without any
hardware rebuildings.
In the following flowchart all steps are described that have to be performed for the upgrade. At a
glance, these are:
– Downloading the eSW file from the installation CD (directory Upgrade_Preparation) and
executing an eSW download for the placement heads (TQM) with CACCIA from a service PC
(not for C&P6/12 placement heads)
– Preparing Box PCs and hardware (see flowchart)
– Installing Windows XP Embedded (recommended) or Windows XP on both Box PCs
– Installing the 704.03 SP1 machine computer software for two-computer operation,
see chapter 5
– Installing the Vision computer software, see chapter 6
– Shutting down the machine
– If necessary, performing hardware rebuildings
– Removing the tables
– Switching on the machine again
– Performing an eSW download (see flowchart)
– Performing complete calibration with PCB and head mapping
NOTICE
It is also possible to send the mapping files that you have saved before to the SIPLACE
Service. The files will be converted and resent to you. If you re-import the converted
mapping files, no PCB/head mapping has to be performed.
– Starting the production
11
Station Software 704.03 SP1 / Installation Manual Ausgabe 10/2011 Edition
Flowchart: Upgrading from 60x software versions
Figure 3-1: Upgrading from 60x software versions
12
Station Software 704.03 SP1 / Installation Manual Ausgabe 10/2011 Edition
4 Requirements
4.1 SIPLACE X- and SX-series software components
4.1.1 Station
The station uses one of the following operating system configurations on the machine and Vision
computer(s):
– Microsoft Windows XP Embedded with Service Pack 2
– Microsoft Windows XP Professional (incl. Service Pack 3 and most recent hotfixes)
The machine computer and Vision computer software can optionally be used in one-computer or
two-computer operation.
4.1.2 Machine components
The following versions of other machine components are required for the station software to
function correctly:
SIPLACE station software SIPLACE Vision SIPLACE Pro
Version 704.03 SP1 Version 421 Version 8.0
CAUTION
The functional statuses of the station computer, Vision computer and SIPLACE Pro
software must be compatible.
13