00196715-04_IM_SSW_704_03_SP1_DE_EN.pdf - 第33页
Station Software 704.03 SP1 / Installation Manual Ausgabe 10/2011 Edition NOTICE The following screen only appe ars if applicat ions are open which use files which must be updated during installation of SIPLACE. Figure 5…
Station Software 704.03 SP1 / Installation Manual Ausgabe 10/2011 Edition
► Click the
One-computer-configuration button or the Two-computer-
configuration button for X-series placement machines with two computers.
5.4.6 Entering the Machine Identification Number (MID)
Figure 5-11: Entering the Machine Identification Number (MID)
► Enter the 8-digit machine identification number into the text box.
NOTICE
You will find the MID on an adhesive label on the side of the protective covers directly
below the label for the number of the relevant location. The number following the dash
after the MID specifies the location and is not entered here (e.g. 00000001-2 stands for
location 2).
After upgrading (from 60x and 70x) the correct MID is already inserted.
► Click the Next button.
32
Station Software 704.03 SP1 / Installation Manual Ausgabe 10/2011 Edition
NOTICE
The following screen only appears if applications are open which use files which must be
updated during installation of SIPLACE.
Figure 5-12: Open applications
► Close the applications or processes listed here by using the Windows Task Manager and then
click the Retry button.
The installation program now installs additional programs on the machine computer.
33
Station Software 704.03 SP1 / Installation Manual Ausgabe 10/2011 Edition
5.4.7 Finalizing the installation
NOTICE
The status only lists the programs that have just been installed. If, for instance, the
current version of SIPLACE Vision was already installed, it is not listed here.
If errors occurred during installation, the status is indicated by the Error button being
displayed next to the program name instead of the Ok button.
► If you wish to read the log of the installation of any program, click the Ok (or Error) button next
to the name of the program.
The Notepad editor is started and displays the appropriate file.
Figure 5-13: Finalizing the installation
► Click the Finish button.
CAUTION
► Wait a few seconds after you have clicked the Finish button, before you switch off
the computer / the machine!
As some installation steps are not performed until the end of the installation by the
InstallShield, the installation might otherwise be incomplete, what may cause
problems during further installations.
In two-computer operation the Vision computer must also
be installed (see chapter 6)
before you shut down the machine computer, as the station will otherwise not boot
correctly due to version conflicts.
In one-computer operation the Vision computer software is automatically installed during
the station software installation.
34