N7201A653E.pdf - 第157页

EJM1EJ-MB-06 M-02 NPM- TT2 6-2 -6 ACTIVATION 16 10 shuttle Select Y -axis 17 Select a table 12 13 Select a table Select X-axis 25 Attach the tray feeder or the feeder cart ● For a tray feeder (→ P.14-8) ● For a feed er c…

100%1 / 502
EJM1EJ-MB-06M-02NPM-TT2
9
11
10
18
Select X-axis
19
Select Y-axis
21
Greasing the XY-axis
linear guide 3
6-2-5
Maintenance
6-2
22
Wipe off the grease that ran out of the edging
●See steps and .
●Check linear guide rail edge and grease nipples whether any
liquefied grease is adhered; if any has, wipe on a regular basis.
7
8
Detach the tray
feeder or the
feeder cart
●For a tray feeder
(→ P.14-8)
●For a feeder cart
(→ P.3-2)
Attach the tray
feeder or the
feeder cart
●For a tray feeder
(→ P.14-8)
●For a feeder cart
(→ P.3-2)
ACTIVATION
20
10 shuttle
EJM1EJ-MB-06M-02NPM-TT2
6-2-6
ACTIVATION
16
10 shuttle
Select Y-axis
17
Select a table
12
13
Select a table
Select X-axis
25
Attach the tray
feeder or the
feeder cart
●For a tray feeder
(→ P.14-8)
●For a feeder cart
(→ P.3-2)
Every
560
hours
PeriodicPeriodicPeriodicPeriodic
inspection
15
14
23
●Repeat steps
to three times
9
22
24
Remove the lint
free cloth
EJM1EJ-MB-06M-02NPM-TT2
Describes the method for greasing the nozzle holder.
Tool used: Syringe (BARRIERTA IEL/V)
Time required: 10 minutes (per head)
2
1
Greasing the nozzle
holder
(8-nozzle head (option))
Detach the
nozzle holder
(→P.7-1)
Refill grease to the oil groove at the clamp
claw
●With the clamp claw attached, apply grease using a small flat-
head screwdriver.
(To prevent grease from adhering to the portions around the
clamp claws)
●Grease: BARRIERTA IEL/V
●Wipe off any grease adhering to portions other than the oil
groove using a cotton swab.
●Be careful no grease adheres to the filter on the nozzle holder tip.
●Before attaching the nozzle holder to the placement head, make
sure that a clamp claw fits into the oil groove.
3
Apply grease to the contact surface of the
clamp claw and the spring for the clamp claw
pusher
●Apply grease lightly using a syringe.
●Grease: BARRIERTA IEL/V
6-3
Contact
surface
Clamp claw
Grease
Oil
groove
Clamp claw
Maintenance
6-3