N7201A653E.pdf - 第391页
NPM- TT2 EJ M1EE-MB-13M-0 2 Close the safety cover Install nozzles for the nozzle changer + ■ To cancel (The screen remains as it is in ) Confirm the message (The nozzle pickup heig ht is measured ) 13-13 -2 ● Nozz le us…
NPM-TT2 EJM1EE-MB-13M-02
Tray 1
13-13-1
+
prepare to install nozzles
Open the safety cover
Explains the tray calibration procedure.
●This task cannot be performed when the tray feeder is not installed.
●It is applicable for 8- and 3-nozzle heads.
Maintenance
13-13
1
1
2
3
4
Servo switch OFF
NPM-TT2 EJM1EE-MB-13M-02
Close the safety cover
Install nozzles for the nozzle
changer
+
■To cancel
(The screen remains as it is
in )
Confirm the message
(The nozzle pickup height is measured)
13-13-2
●Nozzle used
Head
type
Changer
position
Nozzle
type
8
No. 11
230C
3 1002
+
(Pickup position 1 is calibrated)
Confirm that it has been
successfully completed
7
6
5
8
1
8
9
9
Calibration
Servo switch ON
NPM-TT2 EJM1EE-MB-13M-02
(Pickup position 2 is calibrated)
Confirm that it has been
successfully completed
+
●For a recognition error,
13-13-3
Tray 2
or
+
+
Confirm that it has been
successfully completed
Change to
+
Maintenance
13-13
Using the above buttons, move the
recognition image near the center.
Then, press
10
10
11
11
12
12