N7201A653E.pdf - 第267页

NPM- TT2 EJ M1EE-MB-11M-0 2 1 1-2-2 -4 + Attach the feeder cart (→P.3-2) Close the safety cover Close the feeder table cover 16 or on both the front and rear Replacement Servo switch ON 16 15 13 14 12 11 Guide pin Instal…

100%1 / 502
NPM-TT2 EJM1EE-MB-11M-02
11-2-2-3
1
3
+
4
2
+
1
2
3
4
5
+
6
+
Confirm the message
5
7
Detach the feeder cart
(→P.3-2)
9
8
Open the safety cover
10
Open the feeder table cover
6
Confirm the message
Mode
switch
Maintenance
11-2-2
Confirming switch 2
(The PCB-support blocks in lanes 1
and 2 go up so that they are ready
to be removed)
For specification for feeder cart(s) on either the front or rear,
Servo switch OFF
NPM-TT2 EJM1EE-MB-11M-02
11-2-2-4
+
Attach the feeder cart
(→P.3-2)
Close the safety cover
Close the feeder table cover
16
or on both the front and rear
Replacement
Servo switch ON
16
15
13
14
12
11
Guide pin
Install the PCB support block
(Both lane 1 and 2)
●Adjust the guide pins on the main unit
to the holes on the PCB support
block.
●Replace the PCB support block or
change the layout. For the product
number and the layout of the PCB
support block, see “5-3 Cleaning the
PCB-support blocks.”
NPM-TT2 EJM1EE-MB-11M-02
11-2-2-5
19
(Returns to the lane switch screen)
18
Mode
switch
Confirming switch 3
For specification for feeder cart(s) on either the front or rear, or on both the front and rear
Maintenance
11-2-2
19
18
17
+
(The PCB-support block goes down
until origin)
Confirm the message
17