00192801-01.pdf - 第11页
User Manual V 1.15 - Productivity Lift 2 Safety Software version V 40. 1 1 Edition 01/2001 2.1 Overview 3 6DIHW\ This chapt er con tains inform ation on h ow to make safe and optim um use o f the devi ce descr ibed her…
1 Operating instructions User Manual V 1.15 - Productivity Lift
1.2 Organisational measures Software version V 40.11 Edition 01/2001
2
2UJDQLVDWLRQDOPHDVXUHV
Should you have any questions that are not answered by the operating instructions, please con-
tact the device manufacturer direct.
/RFDWLRQRIWKHRSHUDWLQJLQVWUXFWLRQV
The operating instructions can only be of use if they are available at all times. Therefore always
keep them together with the device.
0DQXIDFWXUHUDQGFRQWDFWDGGUHVV
Siemens AG
PL EA 1 V MC
Rupert-Mayer-Str. 44
D-81359 Munich
User Manual V 1.15 - Productivity Lift 2 Safety
Software version V 40.11 Edition 01/2001 2.1 Overview
3
6DIHW\
This chapter contains information on how to make safe and optimum use of the device described
here.
2YHUYLHZ
This device poses very few risks and is simple and safe for the informed user to operate. Users
who do not possess sufficient knowledge, however, can cause damage to the device by perform-
ing illegal operations. This chapter provides information regarding the requirements for safe and
optimum operation of the device.
All those authorised to operate, maintain and repair the device must read chapter "Safety".
6DIHW\FRQFHSW
The safety concept controls the authorisation to use the device and the responsibility of the indi-
vidual users.
This device has been developed and constructed in accordance with the latest technological
standards and the approved safety regulations. It therefore conforms to EU requirements.
,QWHQGHGXVHRIWKHGHYLFH
The device was designed for its use as prescribed. If it is used for anything other than the appli-
cation listed, the manufacturer can not be held responsible for any damage that may occur as a
result.
2 Safety User Manual V 1.15 - Productivity Lift
2.2 Safety concept Software version V 40.11 Edition 01/2001
4
3UHVFULEHGXVH
The prescribed use of the device covers the following:
The Productivity Lift serves to increase the throughput of Siplace automatic placement machines.
Every lift unit has a placement machine of this type. Several lift units arranged in series thus en-
able the parallel arrangement of placement machines although these are physically arranged in a
row.
At the inlet of the first lift unit (input module), printed circuit boards can be transferred on two par-
allel tracks. They are then delivered to the first subsequent placement machine for processing. If
this placement machine is currently occupied or perhaps even out of service, the transferred
PCBs are forwarded to the next placement machine but one. It is however necessary that this
placement machine is of the same type as the previous one. The type of placement machine can
change within such a line of placement machines by means of the relevant settings in the device
configuration. The final module at the end of such a line hands the assembled printed circuit
boards over to the following production line.
,QDSSURSULDWHXVH
Any use made of the device, other than the "prescribed use", without the written consent of the
manufacturer or operating the device beyond the scope of the technical restrictions, is considered
inappropriate.
127(
The technical restrictions can be found in the "Technical Data" chapter of these operating instruc-
tions.
:$51,1*
Inappropriate use of this equipment can result in injury. Please comply with these operating in-
structions.