00900330-01_UM_ASM-ProcessLens_EN.pdf - 第11页

1 Introduction 1.3 Operator levels Instruction manual ASM ProcessLens 03/2021 11 SMT Academy The SMT Academy provides technical training courses for your team, covering everything from ba- sic ASM SMT Solutions operator …

1 Introduction

1.2 Qualification and training of personnel

10 Instruction manual ASM ProcessLens 03/2021

For the product to operate correctly and reliably, it must have been transported, stored, erected

and assembled correctly and must be operated and maintained with care.

1.1.5 Failure to use as prescribed

Failure to use the product as prescribed can result in both danger to life and limb and material

damage. For this reason, use other than as prescribed is expressly prohibited. In the case of

incorrect usage, ASM Assembly Systems Singapore Pte ltd. will not assume liability for any

damage which occurs and will not guarantee the correct and proper function of machine compon-

ents.

Use of the ASM ProcessLens machine other than as prescribed includes, for example:

●

Operation of the ASM ProcessLens machine with safety equipment deactivated or removed.

●

Use of ASM ProcessLens machine that has not been approved.

●

Use of unauthorized accessories and additional modules.

●

Use of the ASM ProcessLens machine by unqualified personnel.

●

Unclear allocation of electrical connecting cables to each machine and the installed options.

●

Persons standing on the cover plates and protective hoods.

1.1.6 Noise emissions

Max. noise emissions 78 dB (A)

1.1.7 Important notes on environmentally-friendly disposal of materials and

components

ASM ProcessLens machines are preferably manufactured using materials and parts that can be

easily separated and disposed of in an environmentally-friendly way.

NOTICE

The owner of the system has sole responsibility for the proper environmentally-friendly dis-

posal of machines, working materials, consumables and wear parts.

► Please observe your national statutory provisions for waste disposal and environ-

mental protection.

1.1.8 Electromagnetic compatibility (EMC)

ASM ProcessLens machines are designed and tested for professional use in industrial applica-

tions. Electromagnetic compatibility in terms of the emission of interference cannot be guaranteed

in any other environment.

1.1.9 Note on original ASM SMT Solutions accessories

► Only use original spare parts and authorized accessories from ASM Assembly Systems

Singapore Pte ltd. The use of other parts will affect safety and will invalidate the liability for

any consequential damage.

1.2 Qualification and training of personnel

Personnel used for operation, preventive maintenance, inspection and installation must hold the

relevant qualifications for the job. The user must keep tight control over their responsibilities, as-

signment and supervision. Any employee who does not have the relevant training must be trained

and given appropriate instruction. The instruction is to be given by trained and authorized person-

nel.

1 Introduction

1.3 Operator levels

Instruction manual ASM ProcessLens 03/2021 11

SMT Academy

The SMT Academy provides technical training courses for your team, covering everything from ba-

sic ASM SMT Solutions operator training to advanced follow-up training for your experts. Our

courses can either be held at your company or at one of our ASM SMT Solutions training centers

worldwide. In addition to our range of standard training programs, we can also offer customized

courses to meet your individual requirements.

ASM SMT Solutions training courses are always on a modular basis. This means that you can

either book a standard course or compile your own training program with the individual topics re-

quired for your inspection environment.

Training courses for ASM ProcessLens

Operator, maintenance and technician (system configuration and repairs) training courses as well

as programmers are available for the ASM ProcessLens.

Standard courses

●

ASM ProcessLens Operation

●

ASM ProcessLens Programming

●

ASM ProcessLens Technical Training

Other training courses

●

SPC Basic Training

●

SPC Advanced Training

NOTICE

Qualification of personnel

► No one may start up, operate or otherwise work on the machine unless they have the

relevant qualification.

► The qualification must be proven by means of training courses or instruction for the

personnel.

1.3 Operator levels

Certain functions or menus may only be executed or accessed by specially trained personnel. A

differentiation is made between the following operator levels:

●

Operator account

●

Supervisor account

●

Super User account

●

ASM Employee account

The operator levels " Operator account " and " Supervisor account" can be password protected.

The operator level " Super User account " is already password protected.

Operator account

This operator level includes those people who have been trained to operate the machine. These

people are authorized to use any functions associated with operating the machine and may call up

any menus needed to use the machine.

Supervisor account

People with this operator level have completed special training and are authorized to perform setup

tasks e.g. creating recipes.

Super User account

People with this operator level are specially trained technicians at the customer end, who can, for

example, define machine option settings.

ASM Employee account

Special area and functions for ASM engineers and software developers.

1 Introduction

1.4 Important notes on this instruction manual

12 Instruction manual ASM ProcessLens 03/2021

1.4 Important notes on this instruction manual

1.4.1 Contents and filing of this instruction manual

This Instruction Manual contains basic information that must be observed when setting up, operat-

ing and maintaining the machine. The service engineers, qualified staff, operators and users plus

system owner must therefore read it before commencing installation and commissioning. The

instructions must be kept permanently accessible where the machine is used.

In addition, the user must ensure that the employees have fully understood the contents of this In-

struction Manual.

1.4.2 Danger notes

► A thorough knowledge of the relevant part of this instruction manual is required before carry-

ing out any work on the machine.

► All work must be carried out by appropriately trained and qualified personnel.

► All warning, caution and danger notes MUST be observed.

► Please also read chapter 2 "Safety" [}15] of this instruction manual through carefully.

1.4.3 Manufacturer's/supplier's liability

We hereby confirm that the contents of this instruction manual are of a descriptive and explanatory

nature only and do not contain any contractual conditions or guarantees. The liability and obliga-

tions assumed by ASM Assembly Systems Singapore Pte ltd. can be found exclusively in the relev-

ant contract agreement concerning the supply of the machine described in this Instruction Manual.

This applies in particular to all statements regarding performance or service life and the agreed

liability for faults or defects. The provisions of the contract regarding the liability for faults or defect

are neither extended nor restricted by any statements in this instruction manual.

1.4.4 Revision table

Document

ASM ProcessLens

Instruction manual

Edition Amendments

03/2021 First edition

1.4.5 Further information about and contents of the documentation package

1.4.5.1 How to get information

If you have any further questions concerning this Instruction Manual or if you would like additional

information on a particular topic, please get in touch with your local ASM SMT Solutions dealer or

ASM Assembly Systems Singapore Pte ltd

535 Yishun Industrial Park A

Singapore 768775