DECAN_S1_Operation_EN.pdf - 第18页
Chap ter 2 This chapter describes how to supply the power and the items to be checked before starting production. Supplying Pow e r and W arming up Nex t Generation, Multi- Funct ional Placer DE CAN S 1 Ope ra tio n Han …
Chapter 2
This chapter describes how to supply the power and the items to be
checked before starting production.
Supplying Power and Warming up
Next Generation, Multi-Functional Placer
DECAN S1 Operation Handbook
2-4
Procedure Preparing for Production > Home
Procedure Preparing for Production
Supplying Power and Warming up
4. Home
Step 1.
Check if the light of the 'READY' button is on
Step 2.
Press the 'Home' button (▼)
Step 3.
It is returned to the origin
When the machine is in 'Ready' state, it can be returned to the origin.
(homing)
Chapter 2
This chapter describes how to supply the power and the items to be
checked before starting production.
Supplying Power and Warming up
Next Generation, Multi-Functional Placer
DECAN S1 Operation Handbook
2-5
Procedure Preparing for Production > Warming-Up
Procedure Preparing for Production
5. Warming-Up
Step 1.
Selecting the 'Utility' Menu: Displays the Utility screen
Step 2.
Selecting the 'Warmup' submenu: Open the Warm Up dialog
box
The warm-up should be performed for about 10 minutes before
starting the part placement in order to increase the placement
accuracy.
Temperature condition: 20 ~ 28℃
Chapter 2
This chapter describes how to supply the power and the items to be
checked before starting production.
Supplying Power and Warming up
Next Generation, Multi-Functional Placer
DECAN S1 Operation Handbook
2-6
Procedure Preparing for Production > Warming-Up
Procedure Preparing for Production
Supplying Power and Warming up
Step 3.
Click the <Start> button. Perform the warm-up
Step 4.
Click the <Stop> button and close the dialog box after
performing the warm-up for about 10 minutes
After selecting the <Use Warm Up Time Setting:> check box,
select the commissioning time in the right edit box and perform
commissioning.
Enter the commissioning time by minute unit. Set it to approximately
10 minutes. Commissioning is then stopped automatically after the
set time has elapsed.