WPC4 services manual.pdf - 第9页
Operational Safety Qualified Personnel Conventions for the use of hazard symbols Service Manual SIPLACE WPC4 9 2 Operational Safety 2.1 Conventions for the use of hazard symbols This manual contains note s that must be o…
General
SIPLACE on the World Wide Web (WWW)
8 Service Manual SIPLACE WPC4
1.3 SIPLACE on the World Wide Web (WWW)
Log into our SIPLACE homepage at http://
www.siplace.com.
X Select either the German or English version.
The different sections contain information about
our products, services and contact persons.
In addition, registered customers can access the
SIPLACE User Group. Here you can call up
special information about our placement systems
e.g.
Technical documentation,
Technical information,
Spare parts lists etc.
Registration for the user group is very simple:
X Click on the Register Now User Group button.
X Fill in the registration form and send it off to us.
Soon afterwards, you will receive your access
authorization with USER ID and password.
Operational Safety
Qualified Personnel Conventions for the use of hazard symbols
Service Manual SIPLACE WPC4
9
2 Operational Safety
2.1 Conventions for the use of hazard symbols
This manual contains notes that must be observed to guarantee your personal safety and to avoid
damage to equipment. These notes are highlighted by warning triangles and are indicated as follows
according to the level of risk:
2.2 Safety Instructions
2.2.1 Qualified Personnel
Qualified or adequately trained personnel means that these people are familiar with the setting up,
operation and maintenance of automatic placement systems and add-on devices and are suitably
qualified, e.g.:
Have been trained, instructed or authorized to switch on and off, isolate, earth and identify electrical
circuits and system components in accordance with normal safety standards.
Have been trained or instructed in the upkeep and use of appropriate safety equipment in
accordance with normal safety standards.
Have received first aid training.
DANGER: Nonobservance of the safety instructions may cause injury to personnel and
damage to the machine!
X Please observe the safety instructions in theuser manual of the specific placement
machine for all service work!
DANGER:
as used in this manual means that death, severe injury or considerable damage to equipment
will occur if the danger instructions are not followed.
WARNING:
as used in this manual means that death, severe injury or considerable damage to equipment
may occur if the warning instructions are not followed.
ATTENTION:
as used in this manual means that slight injury or damage to equipment may occur if the caution
instructions are not followed.
NOTE:
as used in this manual provides information on the product or indicates a part of the manual that
requires particular attention.
Operational Safety
Safety Instructions Safety Instructions for the Power Supply
10 Service Manual SIPLACE WPC4
2.2.2 Safety Instructions for the Power Supply
Consequently, parts of the system carry potentially lethal voltages, even when it is switched off at
the main switch.
Incorrect handling of the placement system can therefore result in death, severe injury or
considerable damage to equipment.
Measurements and repairs must always be carried out by appropriately qualified personnel.
Always follow the applicable accident prevention and VDE regulations (particularly DIN EN 60 204,
part 1) or the regulations specific to your country.
Before starting any repairs, switch off at the main switch and disconnect the placement system from
the main power supply.
Always secure the machine against unauthorized reactivation. If these instructions are not followed,
it is possible to touch live parts, which could result in death or severe injury.
Exchanging components
X End all placement operations on the placement system.
X Shut down the Windows NT operating system correctly, otherwise problems may occur when
restarting or data may be lost.
X Switch the placement system off at the main switch.
X Disconnect the placement system from the main power supply.
X Switch off the machine and attach warnings signs to indicate that service work is in progress.
2.2.2.1 Safety Instructions for Work on the Cutting Device
WARNING: Hazardous voltages!
The machine is supplied with 3 x 400 V~ (or 3 x 204 V~ / 3 x 230 V~ / 3 x 380 V~ / 3 x 415 V~)
± 5 %, 50/60 Hz mains voltage.
X Please observe the safety instructions in the Operating Manual for all service work!
WARNING: Risk of injury when working near the cutter.
If you wish to work on the tape cutter, you must disconnect the machine from the mains supply
and compressed air supply.
X Wait until the operating pressure has dropped to 0 MPa.
X Always secure the machine against unauthorized reactivation.
X Wear appropriately thick protective gloves when working near the blades/the tape deflector!
X There is a high risk of injury from stationary blades and moveable blades and from the tape
deflector of the cutter, even when the machine has been turned off!
X Never reach into the pneumatic cutter from below or into the empty-tape duct from above, not
even to resolve a problem (e.g. when tape is jammed).
CAUTION: Risk of injury when performing service work on the cutter.
Never support the cutter on your body (e.g. on your knee or thighs). Do not place your feet under
it.
X Wear appropriately thick protective gloves.
X When removing the cutter, hold it only on the left and right, on the outside.
X Make sure that no one can injure themselves on the cutter after it has been dismantled!