np134 mechanical reference-1.1e.pdf.pdf - 第73页

Lubrication Instructions Illustrations and tables are used to indicate important information about keeping the machine properly lubricated. ■ T ype and Schedule for Lubrication Within these illustrations, symbols are use…

Grease Gun Kit

A grease gun kits with which grease supply for almost all Fuji equipment can be

performed is available from Fuji. The grease gun kit comes with all the nozzles required

to apply grease to the various grease nipple formats. To obtain the grease gun kit, please

contact your Fuji agent.

Included Parts

NP1ML074

Name: Fuji grease gun kit

Code: AWPJ9600

Grease gun kit contents:

No. Name

Format

Quantity

Box

Sheet

Grease Gun

Syringe

Rubber Hose

Air Hose

Nozzle

D1-9 375x270x75

Z5201PJ0020

Z5201PJ0030

KH-120 (with HSP-1 nozzle)

JS-S30S

SPK-3C

TU0604B-310MM

N -type

P -type

L -type

U -type

N-1 -type

Mushroom Nipple

Connector Nipple

Z5101PJ0451

TS6-01

Tube

Connector

2x3-150 mm

PN-1/8-PT1/8-BS

NP1ML073

Part 3 Chapter 2 Lubrication

Edition 1.1 3-2-2 NP-134E/134ME Mechanical

Lubrication Instructions

Illustrations and tables are used to indicate important information about keeping the

machine properly lubricated.

■ Type and Schedule for Lubrication

Within these illustrations, symbols are used to indicate the location, type and schedule

for lubrication.

The following symbols are used.

✔: Apply an appropriate amount of lubricant.

R: Apply for rust prevention.

N/A: Lubrication prohibited.

The lubrication schedules are based on eight hours of operation per day, five days per

week (40 hours) and 20 days per month (160 hours). However, if the machines are being

operated in two or three shifts per day, the lubrication schedules should be used as

follows.

Every day: Eight hours from when the machine is turned on, after every

eight hour shift, or after one day's operation.

Weekly: After 40 hours of operation, whether the machine is being used

in two or three shifts, or after one week's operation.

Monthly: After 160 hours of operation, whether the machine is being

used in two or three shifts, or after one month's operation.

Every 3 months: After 480 hours of operation, whether the machine is being

used in two or three shifts, or after three month's operation.

Every 6 months: After 960 hours of operation, whether the machine is being

used in two or three shifts, or after six month's operation.

■ Locations for Lubrication

Locations for lubrication are indicated in the illustrations using arrows and numbers.

White arrows are used to indicate surfaces that require greasing or oil. Black arrows

indicate grease nipples, and signify that grease should be inserted using a grease pump.

Note: Even LM blocks that do not have a nipple can be lubricated by applying grease between the

block and the LM rail (bearing mechanism). The grease that adheres to the ball bearings

and rollers will be taken into the LM block and thereby serve to lubricate the LM block.

■ Lubrication Checklist

A lubrication checklist is provided at the end of this chapter. This checklist should be

used as follows.

1. Check the lubrication points corresponding to the reference numbers shown in the

illustrations.

2. Mark each check box after lubricating each point.

LM block

(1)

(2)

LM001

LM rail

Part 3 Chapter 2 Lubrication

Edition 1.1 3-2-3 NP-134E/134ME Mechanical

2.1 XY-Robot Lubrication (Y-axis LM Guides)

Note: The ball screws and LM guides on the X-axis, and the ball screws on the Y-axis are

self-lubricating.

1. Arrow marks in the illustrations indicate lubrication points.

Black arrows indicate points where a grease gun is required.

2. Numbers shown in parentheses correspond to items on the checklist provided at

the end of this chapter.

NP1ML058

(2)

(1)

(3)

(4)

Lubrication

Points

No.

Lubrication

Schedule

Daphne Eponex

No. 2

LM block

1 ~ 4

✔ Monthly

Table-001a

✔ : Lubricate N/A : Do not lubricate

Part 3 Chapter 2 Lubrication

Edition 1.1 3-2-4 NP-134E/134ME Mechanical