Error Code List.pdf - 第30页

AV131 ERROR CODE LIST 2.4 Errors D79EEC- 91-210-A 0 2.4- 7 1700 XY inte rlo ck (R igh t rail ) DESCRI PTIO N Int er lock was detecte d betwe en XY t able and right r ail. CAUSE W hi l e X Y tab l e i s moving right ra il…

AV131

ERROR CODE LIST

2.4 Errors

D79EEC-91-210-A0

2.4-6

1306

Data check

DESCRIPTION

Data do not meet the creating condition. Data do not satisfy the production condition.

CAUSE

Data condition required for production is insufficient.

SOLUTION

Enter the Data modification mode and press the data check key to confirm NG data items. And then change data.

NOTE

1307

Thermal trip (Blower)

DESCRIPTION

Thermal switch for the blower has detected overcurrent.

CAUSE

Tripped thermal switch for the blower.

SOLUTION

Reset the thermal relay.

NOTE

1310

Driver condition

DESCRIPTION

Trouble is found in the servo driver.

CAUSE

Servo driver alarm signal was detected.

SOLUTION

Cancel the driver error.

NOTE

1314

Safety relay

DESCRIPTION

Safety relay has not been properly reset.

CAUSE

There are some troubles in the safety relay.

SOLUTION

Replace the safety relay.

NOTE

1316

Thermal trip (Pump)

DESCRIPTION

Thermal switch for the Pump has detected overcurrent.

CAUSE

Thermal switch for the Pump was activated due to overcurrent.

SOLUTION

Reset the thermal relay.

NOTE

1516

Driver communication error

DESCRIPTION

Communication with an axial driver went wrong.

CAUSE

Communication error between the NC board and driver was detected.

SOLUTION

Call the Servicing Department of our company.

NOTE

AV131

ERROR CODE LIST

2.4 Errors

D79EEC-91-210-A0

2.4-7

1700

XY interlock (Right rail)

DESCRIPTION

Interlock was detected between XY table and right rail.

CAUSE

While XY table is moving right rail traverse limit sensor (80000:bit0) was detected.

SOLUTION

Please confirm whether right rail is down position. Please confirm right rail traverse limit sensor.

NOTE

1701

XY interlock (Left rail)

DESCRIPTION

Interlock was detected between XY table and left rail.

CAUSE

While XY table is moving left rail traverse limit sensor (80040:bit4) was detected.

SOLUTION

Please confirm whether left rail is down position. Please confirm left rail traverse limit sensor.

NOTE

1702

Auto width interlock

DESCRIPTION

Auto width interlock was detected.

CAUSE

Interlock signal was input while auto width running.

It tried to operate auto width axis with the interlock signal input.

SOLUTION

Please confirm interlock signal. Interlock signal to which the auto width refers is as follows.

<Interlock signal> PCB detection 1 (80000:bit2) PCB detection 2 (80000:bit3) PCB detection 3 (80040:bit6) PCB

detection 4 (80040:bit7) XY table PCB detection (80003:bit0)

Right belt motor output (Positive rotation 80020:bit2) (Reverse rotation 80020:bit3)

Left belt motor output (Positive rotation 80060:bit2) (Reverse rotation 80060:bit3)

Safety cover (80581:bit0/bit1/bit2/bit3) Emergency input (80581:bit4/bit5/bit6/bit7)

XY axis origin (NC origin) H axis origin (M.ORG)

NOTE

1703

Air down interlock

DESCRIPTION

Air pressure was down.

CAUSE

Air down sensor (80002:bit5) was detected while machine was running.

SOLUTION

Please confirm whether the air pressure is correct.

NOTE

1704

Brake switch interlock

DESCRIPTION

H axis brake switch became a release side.

CAUSE

Brake SW input (80081:bit5) was release side while H axis was running.

SOLUTION

Please switch the brake switch to a lock side.

NOTE

AV131

ERROR CODE LIST

2.4 Errors

D79EEC-91-210-A0

2.4-8

1705

Handle interlock

DESCRIPTION

Pushing H axis rotation wheel was detected.

CAUSE

H axis wheel detection (800C3:bit2) was detected while H axis was running.

SOLUTION

Please return H axis rotation wheel to original position.

NOTE

1706

Feeder float interlock (Left)

DESCRIPTION

Feeder float interlock of left part supply unit was detected.

CAUSE

ZL feeder float detection sensor (80041:bit1) was detected while ZL axis was running.

SOLUTION

Please confirm the setting of part supply unit left feeder.

NOTE

1707

Feeder float interlock (Right)

DESCRIPTION

Feeder float interlock of right part supply unit was detected.

CAUSE

ZR feeder float detection sensor (80001:bit6) was detected while ZR axis was running.

SOLUTION

Please confirm the setting of part supply unit right feeder.

NOTE

1708

Power failure interlock

DESCRIPTION

The power failure was detected while the machine was running.

CAUSE

Power failure (80580:bit7) was detected while the machine was running.

SOLUTION

Please turn power failure reset signal (805A0:bit7) on and off by the [Output check] of [Machine adjustment] to reset

power failure.

NOTE

1709

θH axis plus overrun interlock

DESCRIPTION

The plus overrun interlock of the θH axis was detected.

CAUSE

θH plus overrun (800C1:bit2) was detected while the θH axis was running. θH axis is located near mechanical

stopper.

SOLUTION

Please confirm θH plus overrun detection. Please confirm θH axis position.

NOTE

1710

θA axis plus overrun interlock

DESCRIPTION

The plus overrun interlock of the θA axis was detected.

CAUSE

θA plus overrun (80041:bit4) was detected while the θA axis was running. θA axis is located near mechanical

stopper.

SOLUTION

Please confirm θA plus overrun detection. Please confirm θA axis position.

NOTE