Error Code List.pdf - 第60页

AV131 ERROR CODE LIST 2.4 Errors D79EEC- 91-210-A 0 2.4- 37 2659 Re ar upper cove r safe ty dete cti on DESCRI PTIO N The m achine beca m e a safe ty stop co ndition by the sa fety detection in the rear uppe r cove r. CA…

AV131

ERROR CODE LIST

2.4 Errors

D79EEC-91-210-A0

2.4-36

2653

Rear right safety detection

DESCRIPTION

The machine became a safety stop condition by the safety detection in the right feeder cover.

CAUSE

The cover of the right feeder has been opened.

SOLUTION

Press [Return] after closing the cover. Then please release the safety stop condition to push <Start> with

<ENABLING>.

NOTE

2654

Rear left center safety detection

DESCRIPTION

The machine became a safety stop condition by the safety detection in the left center feeder cover.

CAUSE

The cover of the left center feeder has been opened.

SOLUTION

Press [Return] after closing the cover. Then please release the safety stop condition to push <Start> with

<ENABLING>.

NOTE

2655

Rear right center safety detection

DESCRIPTION

The machine became a safety stop condition by the safety detection in the right center feeder cover.

CAUSE

The cover of the right center feeder has been opened.

SOLUTION

Press [Return] after closing the cover. Then please release the safety stop condition to push <Start> with

<ENABLING>.

NOTE

2656

Front cover safety detection

DESCRIPTION

The machine became a safety stop condition by the safety detection in the front cover.

CAUSE

The cover of the front has been opened.

SOLUTION

Press [Return] after closing the cover. Then please release the safety stop condition to push <Start> with

<ENABLING>.

NOTE

2657

Right rail cover safety detection

DESCRIPTION

The machine became a safety stop condition by the safety detection in the right rail cover.

CAUSE

The cover of the right rail has been opened.

SOLUTION

Press [Return] after closing the cover. Then please release the safety stop condition to push <Start> with

<ENABLING>.

NOTE

2658

Left rail cover safety detection

DESCRIPTION

The machine became a safety stop condition by the safety detection in the left rail cover.

CAUSE

The cover of the left rail has been opened.

SOLUTION

Press [Return] after closing the cover. Then please release the safety stop condition to push <Start> with

<ENABLING>.

NOTE

AV131

ERROR CODE LIST

2.4 Errors

D79EEC-91-210-A0

2.4-37

2659

Rear upper cover safety detection

DESCRIPTION

The machine became a safety stop condition by the safety detection in the rear upper cover.

CAUSE

The cover of the rear upper has been opened.

SOLUTION

Press [Return] after closing the cover. Then please release the safety stop condition to push <Start> with

<ENABLING>.

NOTE

2663

Cancel replacement completion input (open rear left cover)

DESCRIPTION

Part replacement completion input was canceled.

CAUSE

Rear left cover was opened.

SOLUTION

Please close the rear left cover then input part replacement completion switch again.

NOTE

2664

Cancel replacement completion input (open rear right cover)

DESCRIPTION

Part replacement completion input was canceled.

CAUSE

Rear right cover was opened.

SOLUTION

Please close the rear right cover then input part replacement completion switch again.

NOTE

2665

Cancel replacement completion input (float left feeder)

DESCRIPTION

Part replacement completion input was canceled.

CAUSE

Feeder in the left part supply floats.

SOLUTION

Please confirm feeder condition then input part replacement completion switch again.

NOTE

2666

Cancel replacement completion input (float right feeder)

DESCRIPTION

Part replacement completion input was canceled.

CAUSE

Feeder in the right part supply floats.

SOLUTION

Please confirm feeder condition then input part replacement completion switch again.

NOTE

2668

Cancel replacement completion input (never open rear left cover)

DESCRIPTION

Part replacement completion input was canceled.

CAUSE

Part replacement completion operation was done without opening the rear left cover.

SOLUTION

Please close the cover after opening the cover once then input part replacement completion switch again.

NOTE

AV131

ERROR CODE LIST

2.4 Errors

D79EEC-91-210-A0

2.4-38

2669

Cancel replacement completion input (never open rear right cover)

DESCRIPTION

Part replacement completion input was canceled.

CAUSE

Part replacement completion operation was done without opening the rear right cover.

SOLUTION

Please close the cover after opening the cover once then input part replacement completion switch again.

NOTE

2670

Insertion error (Neither lead detection)

DESCRIPTION

Insertion error was detected. Neither of two leads of the part was detected to have been inserted.

CAUSE

Refer to “DETAILED DESCRIPTION”.

SOLUTION

Take appropriate action according to “DETAILED DESCRIPTION”.

Close the error screen and remove the part concerned.

Refer to the pop-up guidance displayed on the screen for how to continue/resume production.

DETAILED DESCRIPTION

Probable causes and actions to be taken are as follows:

Improper handover position from the rotary chuck to the slide chuck. Adjust the stroke and position of the slide

chuck.

Nonsmooth piston movements of the slide chuck Apply oil to the piston.

Damaged or bent rotary chuck Replace the rotary chuck.

Gap in the closed rotary chuck Replace the rotary chuck if the gap is 0.1 mm or more.

Part lead bent more than the specification Use a part that conforms to the specifications.

Nonsmooth part feed in the feeder due to taping width narrower than the specification. Use a part that conforms

to the specifications.

Nonsmooth part feed in the feeder due to taping width wider than the specification. Use a part that conforms to

the specifications.

Loose parts taping Use a part that conforms to the taping strength of the specifications.

Incomplete cartridge/feeder setting Check that the feeder and cartridge have been properly set in position.

Improper part pulling position of the rotary chuck Adjust the transfer chuck unit and feed unit.

Nonsmooth rotary chuck opening/closing Apply oil to the swing unit and sliding unit.

Air leaking due to damaged or cracked air hose Replace the hose.

Bent slide chuck block Replace the block.

Worn tape cutter blade Replace the blade.

Improperly adjusted tape cutter blade position Adjust the extension of the blade.

The machine is stopped due to insertion error even when parts have been exhausted. (Part detection sensor is

always ON.) Clean and adjust the part detection sensor.

NOTE